virtio-net: delete also control queue when TX/RX deleted
target/i386: enable monitor and ucode revision with -cpu max
target/i386: set the CPUID level to 0x14 on old machine-type
target/i386: kvm: initialize feature MSRs very early
target/i386: add a ucode-rev property
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
RH-Author: Paolo Bonzini <pbonzini@redhat.com>
Message-id: <20200217162316.2464-3-pbonzini@redhat.com>
Patchwork-id: 93909
O-Subject: [RHEL-AV-8.2.0 qemu-kvm PATCH 2/6] target/i386: add a ucode-rev property
Bugzilla: 1791648
RH-Acked-by: Eduardo Habkost <ehabkost@redhat.com>
RH-Acked-by: Maxim Levitsky <mlevitsk@redhat.com>
RH-Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add the property and plumb it in TCG and HVF (the latter of which
tried to support returning a constant value but used the wrong MSR).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1579544504-3616-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4e45aff398cd1542c2a384a2a3b8600f23337d86)
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Paolo Bonzini <pbonzini@redhat.com>
Message-id: <20200217162316.2464-2-pbonzini@redhat.com>
Patchwork-id: 93899
O-Subject: [RHEL-AV-8.2.0 qemu-kvm PATCH 1/6] target/i386: kvm: initialize feature MSRs very early
Bugzilla: 1791648
RH-Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
RH-Acked-by: Maxim Levitsky <mlevitsk@redhat.com>
RH-Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some read-only MSRs affect the behavior of ioctls such as
KVM_SET_NESTED_STATE. We can initialize them once and for all
right after the CPU is realized, since they will never be modified
by the guest.
Reported-by: Qingua Cheng <qcheng@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1579544504-3616-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 420ae1fc51c99abfd03b1c590f55617edd2a2bed)
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: plai@redhat.com
Message-id: <20200507220923.13723-1-plai@redhat.com>
Patchwork-id: 96347
O-Subject: [RHEL8.2.1 AV qemu-kvm PATCH RESEND] target/i386: set the CPUID level to 0x14 on old machine-type
Bugzilla: 1513681
RH-Acked-by: Eduardo Habkost <ehabkost@redhat.com>
RH-Acked-by: Igor Mammedov <imammedo@redhat.com>
RH-Acked-by: Danilo de Paula <ddepaula@redhat.com>
From: Luwei Kang <luwei.kang@intel.com>
BZ https://bugzilla.redhat.com/show_bug.cgi?id=1513681
Brew: http://brewweb.devel.redhat.com/brew/taskinfo?taskID=28146304
Branch: rhel-av-8.2.1
Tested on intel-icelake-y-01.ml3.eng.bos.redhat.com.
The CPUID level need to be set to 0x14 manually on old
machine-type if Intel PT is enabled in guest. E.g. the
CPUID[0].EAX(level)=7 and CPUID[7].EBX[25](intel-pt)=1 when the
Qemu with "-machine pc-i440fx-3.1 -cpu qemu64,+intel-pt" parameter.
Some Intel PT capabilities are exposed by leaf 0x14 and the
missing capabilities will cause some MSRs access failed.
This patch add a warning message to inform the user to extend
the CPUID level.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1584031686-16444-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit ddc2fc9e4e42ebce48b088963dc7fbd1c08d5f33)
Signed-off-by: Paul Lai <plai@redhat.com>
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Paolo Bonzini <pbonzini@redhat.com>
Message-id: <20200217162316.2464-7-pbonzini@redhat.com>
Patchwork-id: 93910
O-Subject: [RHEL-AV-8.2.0 qemu-kvm PATCH 6/6] target/i386: enable monitor and ucode revision with -cpu max
Bugzilla: 1791648
RH-Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
RH-Acked-by: Maxim Levitsky <mlevitsk@redhat.com>
RH-Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These two features were incorrectly tied to host_cpuid_required rather than
cpu->max_features. As a result, -cpu max was not enabling either MONITOR
features or ucode revision.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit be02cda3afde60d219786e23c3f8edb53aec8e17)
[RHEL7: context, upstream uses g_autofree]
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Julia Suvorova <jusual@redhat.com>
Message-id: <20200219213431.11913-5-jusual@redhat.com>
Patchwork-id: 93983
O-Subject: [RHEL-AV-8.2.0 qemu-kvm PATCH 4/4] virtio-net: delete also control queue when TX/RX deleted
Bugzilla: 1791590
RH-Acked-by: Danilo de Paula <ddepaula@redhat.com>
RH-Acked-by: Stefano Garzarella <sgarzare@redhat.com>
RH-Acked-by: Michael S. Tsirkin <mst@redhat.com>
From: Yuri Benditovich <yuri.benditovich@daynix.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1708480
If the control queue is not deleted together with TX/RX, it
later will be ignored in freeing cache resources and hot
unplug will not be completed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20191226043649.14481-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d945d9f1731244ef341f74ede93120fc9de35913)
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
qcow2: Fix qcow2_alloc_cluster_abort() for external data file
mirror: Wait only for in-flight operations
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, a MirrorOp is already in s->ops_in_flight when
mirror_co_read() waits for free slots, so if not enough slots are
immediately available, an operation can end up waiting for itself, or
two or more operations can wait for each other to complete, which
results in a hang.
Fix this by adding a flag to MirrorOp that tells us if the request is
already in flight (and therefore occupies slots that it will later
free), and picking only such operations for waiting.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For external data file, cluster allocations return an offset in the data
file and are not refcounted. In this case, there is nothing to do for
qcow2_alloc_cluster_abort(). Freeing the same offset in the qcow2 file
is wrong and causes crashes in the better case or image corruption in
the worse case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block/curl: HTTP header fields allow whitespace around values
block/curl: HTTP header field names are case insensitive
backup: Improve error for bdrv_getlength() failure
mirror: Make sure that source and target size match
iotests/143: Create socket in $SOCK_DIR
nbd/server: Avoid long error message assertions CVE-2020-10761
block: Call attention to truncation of long NBD exports
qemu-img convert: Don't pre-zero images
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
RH-Author: Kevin Wolf <kwolf@redhat.com>
Message-id: <20200731081831.13781-2-kwolf@redhat.com>
Patchwork-id: 98117
O-Subject: [RHEL-AV-8.2.1.z qemu-kvm PATCH 1/1] qemu-img convert: Don't pre-zero images
Bugzilla: 1861682
RH-Acked-by: Stefano Garzarella <sgarzare@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Eric Blake <eblake@redhat.com>
Since commit 5a37b60a61c, qemu-img create will pre-zero the target image
if it isn't already zero-initialised (most importantly, for host block
devices, but also iscsi etc.), so that writing explicit zeros wouldn't
be necessary later.
This could speed up the operation significantly, in particular when the
source image file was only sparsely populated. However, it also means
that some block are written twice: Once when pre-zeroing them, and then
when they are overwritten with actual data. On a full image, the
pre-zeroing is wasted work because everything will be overwritten.
In practice, write_zeroes typically turns out faster than writing
explicit zero buffers, but slow enough that first zeroing everything and
then overwriting parts can be a significant net loss.
Meanwhile, qemu-img convert was rewritten in 690c7301600 and zero blocks
are now written to the target using bdrv_co_pwrite_zeroes() if the
target could be pre-zeroed. This way we already make use of the faster
write_zeroes operation, but avoid writing any blocks twice.
Remove the pre-zeroing because these days this former optimisation has
actually turned into a pessimisation in the common case.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200622151203.35624-1-kwolf@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit edafc70c0c8510862f2f213a3acf7067113bcd08)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Eric Blake <eblake@redhat.com>
Message-id: <20200610183202.3780750-3-eblake@redhat.com>
Patchwork-id: 97495
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH 2/2] block: Call attention to truncation of long NBD exports
Bugzilla: 1845384
RH-Acked-by: Sergio Lopez Pascual <slp@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user. Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Fixes: https://bugzilla.redhat.com/1843684
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
(cherry picked from commit 5c86bdf1208916ece0b87e1151c9b48ee54faa3e)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
RH-Author: Eric Blake <eblake@redhat.com>
Message-id: <20200610183202.3780750-2-eblake@redhat.com>
Patchwork-id: 97494
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH 1/2] nbd/server: Avoid long error message assertions CVE-2020-10761
Bugzilla: 1845384
RH-Acked-by: Sergio Lopez Pascual <slp@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Ever since commit 36683283 (v2.8), the server code asserts that error
strings sent to the client are well-formed per the protocol by not
exceeding the maximum string length of 4096. At the time the server
first started sending error messages, the assertion could not be
triggered, because messages were completely under our control.
However, over the years, we have added latent scenarios where a client
could trigger the server to attempt an error message that would
include the client's information if it passed other checks first:
- requesting NBD_OPT_INFO/GO on an export name that is not present
(commit 0cfae925 in v2.12 echoes the name)
- requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is
not present (commit e7b1948d in v2.12 echoes the name)
At the time, those were still safe because we flagged names larger
than 256 bytes with a different message; but that changed in commit
93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD
string limit. (That commit also failed to change the magic number
4096 in nbd_negotiate_send_rep_err to the just-introduced named
constant.) So with that commit, long client names appended to server
text can now trigger the assertion, and thus be used as a denial of
service attack against a server. As a mitigating factor, if the
server requires TLS, the client cannot trigger the problematic paths
unless it first supplies TLS credentials, and such trusted clients are
less likely to try to intentionally crash the server.
We may later want to further sanitize the user-supplied strings we
place into our error messages, such as scrubbing out control
characters, but that is less important to the CVE fix, so it can be a
later patch to the new nbd_sanitize_name.
Consideration was given to changing the assertion in
nbd_negotiate_send_rep_verr to instead merely log a server error and
truncate the message, to avoid leaving a latent path that could
trigger a future CVE DoS on any new error message. However, this
merely complicates the code for something that is already (correctly)
flagging coding errors, and now that we are aware of the long message
pitfall, we are less likely to introduce such errors in the future,
which would make such error handling dead code.
Reported-by: Xueqiang Wei <xuwei@redhat.com>
CC: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761
Fixes: 93676c88d7
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200610163741.3745251-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit 5c4fe018c025740fef4a0a4421e8162db0c3eefd)
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
RH-Author: Kevin Wolf <kwolf@redhat.com>
Message-id: <20200603160325.67506-11-kwolf@redhat.com>
Patchwork-id: 97110
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH v2 10/11] mirror: Make sure that source and target size match
Bugzilla: 1778593
RH-Acked-by: Eric Blake <eblake@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Stefano Garzarella <sgarzare@redhat.com>
If the target is shorter than the source, mirror would copy data until
it reaches the end of the target and then fail with an I/O error when
trying to write past the end.
If the target is longer than the source, the mirror job would complete
successfully, but the target wouldn't actually be an accurate copy of
the source image (it would contain some additional garbage at the end).
Fix this by checking that both images have the same size when the job
starts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e83dd6808c6e0975970f37b49b27cc37bb54eea8)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Kevin Wolf <kwolf@redhat.com>
Message-id: <20200603160325.67506-6-kwolf@redhat.com>
Patchwork-id: 97103
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH v2 05/11] backup: Improve error for bdrv_getlength() failure
Bugzilla: 1778593
RH-Acked-by: Eric Blake <eblake@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Stefano Garzarella <sgarzare@redhat.com>
bdrv_get_device_name() will be an empty string with modern management
tools that don't use -drive. Use bdrv_get_device_or_node_name() instead
so that the node name is used if the BlockBackend is anonymous.
While at it, start with upper case to make the message consistent with
the rest of the function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200430142755.315494-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 58226634c4b02af7b10862f7fbd3610a344bfb7f)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Richard Jones <rjones@redhat.com>
Message-id: <20200528142737.17318-3-rjones@redhat.com>
Patchwork-id: 96895
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH 2/2] block/curl: HTTP header field names are case insensitive
Bugzilla: 1841038
RH-Acked-by: Eric Blake <eblake@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
From: David Edmondson <david.edmondson@oracle.com>
RFC 7230 section 3.2 indicates that HTTP header field names are case
insensitive.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-3-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 69032253c33ae1774233c63cedf36d32242a85fc)
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
RH-Author: Richard Jones <rjones@redhat.com>
Message-id: <20200528142737.17318-2-rjones@redhat.com>
Patchwork-id: 96894
O-Subject: [RHEL-AV-8.2.1 qemu-kvm PATCH 1/2] block/curl: HTTP header fields allow whitespace around values
Bugzilla: 1841038
RH-Acked-by: Eric Blake <eblake@redhat.com>
RH-Acked-by: Max Reitz <mreitz@redhat.com>
RH-Acked-by: Danilo de Paula <ddepaula@redhat.com>
From: David Edmondson <david.edmondson@oracle.com>
RFC 7230 section 3.2 indicates that whitespace is permitted between
the field name and field value and after the field value.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-2-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 7788a319399f17476ff1dd43164c869e320820a2)
Signed-off-by: Danilo C. L. de Paula <ddepaula@redhat.com>
When using `query-cpu-definitions` using `-machine none`,
QEMU is resolving all CPU models to their latest versions. The
actual CPU model version being used by another machine type (e.g.
`pc-q35-4.0`) might be different.
In theory, this was OK because the correct CPU model
version is returned when using the correct `-machine` argument.
Except that in practice, this breaks libvirt expectations:
libvirt always use `-machine none` when checking if a CPU model
is runnable, because runnability is not expected to be affected
when the machine type is changed.
For example, when running on a Haswell host without TSX,
Haswell-v4 is runnable, but Haswell-v1 is not. On those hosts,
`query-cpu-definitions` says Haswell is runnable if using
`-machine none`, but Haswell is actually not runnable using any
of the `pc-*` machine types (because they resolve Haswell to
Haswell-v1). In other words, we're breaking the "runnability
guarantee" we promised to not break for a few releases (see
qemu-deprecated.texi).
To address this issue, change the default CPU model version to v1
on all machine types, so we make `query-cpu-definitions` output
when using `-machine none` match the results when using `pc-*`.
This will change in the future (the plan is to always return the
latest CPU model version if using `-machine none`), but only
after giving libvirt the opportunity to adapt.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1779078
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191205223339.764534-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The correct way to do this is to deassert the input pins on the CPU side.
This is the case since a previous change.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157548862298.3650476.1228720391270249433.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If a new setmemtable command comes in once the vhost threads are
running, it will remap the guests address space and the threads
will now be looking in the wrong place.
Fortunately we're running this command under lock, so we can
update the queue mappings so that threads will look in the new-right
place.
Note: This doesn't fix things that the threads might be doing
without a lock (e.g. a readv/writev!) That's for another time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In future patches we'll be performing commands on the slave-fd driven
by commands on queues, since those queues will be driven by individual
threads we need to make sure they don't attempt to use the slave-fd
for multiple commands in parallel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When we receive an unexpected message type on the slave fd, print
the type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add the memory region names to section rounding/alignment
warnings.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200116202414.157959-2-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Factor out slot status check into a helper function. Add an additional
check after completing transfers. This is needed in case a guest
queues multiple transfers in a row and a device unplug happens while
qemu processes them.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1786413
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200107083606.12393-1-kraxel@redhat.com
I've got a case where usbredir_write manages to call back into itself
via spice; this patch causes the recursion to fail (0 bytes) the write;
this seems to avoid the deadlock I was previously seeing.
I can't say I fully understand the interaction of usbredir and spice;
but there are a few similar guards in spice and usbredir
to catch other cases especially onces also related to spice_server_char_device_wakeup
This case seems to be triggered by repeated migration+repeated
reconnection of the viewer; but my debugging suggests the migration
finished before this hits.
The backtrace of the hang looks like:
reds_handle_ticket
reds_handle_other_links
reds_channel_do_link
red_channel_connect
spicevmc_connect
usbredir_create_parser
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
spice_chr_write
spice_server_char_device_wakeup
red_char_device_wakeup
red_char_device_write_to_device
vmc_write
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
qemu_mutex_lock_impl
and we fail as we lang through qemu_chr_write_buffer's lock
twice.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1752320
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191218113012.13331-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Virtqueue notifications are not necessary during polling, so we disable
them. This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.
Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled. The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.
There is a measurable performance improvement of 5-10% with the null-co
block driver. Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
crypto: add support for nettle's native XTS impl
crypto: add support for gcrypt's native XTS impl
tests: benchmark crypto with fixed data size, not time period
tests: allow filtering crypto cipher benchmark tests
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
Add support for specifying a cipher mode and chunk size as argv to
filter which combinations are benchmarked. For example to only
benchmark XTS mode with 512 byte chunks:
./tests/benchmark-crypto-cipher xts 512
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the crypto benchmarks are processing data in varying chunk
sizes, over a fixed time period. This turns out to be a terrible idea
because with small chunk sizes the overhead of checking the elapsed
time on each loop iteration masks the true performance.
Benchmarking over a fixed data size avoids the loop running any system
calls which can interfere with the performance measurements.
Before this change
Enc chunk 512 bytes 2283.47 MB/sec Dec chunk 512 bytes 2236.23 MB/sec OK
Enc chunk 4096 bytes 2744.97 MB/sec Dec chunk 4096 bytes 2614.71 MB/sec OK
Enc chunk 16384 bytes 2777.53 MB/sec Dec chunk 16384 bytes 2678.44 MB/sec OK
Enc chunk 65536 bytes 2809.34 MB/sec Dec chunk 65536 bytes 2699.47 MB/sec OK
After this change
Enc chunk 512 bytes 2058.22 MB/sec Dec chunk 512 bytes 2030.11 MB/sec OK
Enc chunk 4096 bytes 2699.27 MB/sec Dec chunk 4096 bytes 2573.78 MB/sec OK
Enc chunk 16384 bytes 2748.52 MB/sec Dec chunk 16384 bytes 2653.76 MB/sec OK
Enc chunk 65536 bytes 2814.08 MB/sec Dec chunk 65536 bytes 2712.74 MB/sec OK
The actual crypto performance hasn't changed, which shows how
significant the mis-measurement has been for small data sizes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
target/i386: Introduce Denverton CPU model
target/i386: Add Snowridge-v2 (no MPX) CPU model
i386: Add CPUID bit for CLZERO and XSAVEERPTR
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
The CPUID bits CLZERO and XSAVEERPTR are availble on AMD's ZEN platform
and could be passed to the guest.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new version of Snowridge CPU model that removes MPX feature.
MPX support is being phased out by Intel. GCC has dropped it, Linux kernel
and KVM are also going to do that in the future.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20191012024748.127135-1-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Denverton is the Atom Processor of Intel Harrisonville platform.
For more information:
https://ark.intel.com/content/www/us/en/ark/products/\
codename/63508/denverton.html
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190718073405.28301-1-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
