!29 【LLVM平行宇宙】add clang compile support on AArch64

From: @liyunfei33 
Reviewed-by: @Charlie_li 
Signed-off-by: @Charlie_li

Add-AArch64-clang-longjmp-support.patch

@@ -0,0 +1,117 @@
+diff --git a/include/pub_tool_libcsetjmp.h b/include/pub_tool_libcsetjmp.h
+index 681450cef..ccdf295df 100644
+--- a/include/pub_tool_libcsetjmp.h
++++ b/include/pub_tool_libcsetjmp.h
+@@ -126,6 +126,111 @@ UWord VG_MINIMAL_SETJMP(VG_MINIMAL_JMP_BUF(_env));
+ __attribute__((noreturn))
+ void  VG_MINIMAL_LONGJMP(VG_MINIMAL_JMP_BUF(_env));
+ 
++#elif defined __aarch64__ && defined __clang__
++
++// __builtin_setjmp is not implemented by the standard C library
++// used on Android in current llvm-based toolchains as of NDK r19.
++//
++// Here is a custom implementation of Valgrind's "minimal" setjmp
++// interface. Per the comment at the top of this file, we only need
++// to save integer registers.
++//
++// Per the Procedure Call Standard for the ARM 64-bit Architecture
++// document,
++// http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055b/IHI0055B_aapcs64.pdf
++// Section 5.1.1. General-purpose registers:
++// >
++// > A subroutine invocation must preserve the contents of the
++// > registers r19-r29 and SP."
++//
++// We also need to save and restore r30, the link register, i.e.
++// the default destination that a 'ret' instruction branches to.
++//
++// Note that this document is phrased in terms of 'r' registers
++// (e.g. "r30") because it aims to be agnostic as to A64 vs A32
++// instruction sets, but here we are targeting the A64 instruction
++// set, so we are dealing with 'x' registers.
++
++
++#define VG_MINIMAL_JMP_BUF(_name)        UWord _name [13]
++
++__attribute__((returns_twice))
++inline UWord VG_MINIMAL_SETJMP(VG_MINIMAL_JMP_BUF(_env))
++{
++   asm volatile(
++     // x9 is the first of the regular temporary registers
++     // per the above-mentioned Procedule Call Standard document.
++     // Use it as temporary to hold the value of SP, since str does
++     // not accept SP as operand.
++     "  mov x9, sp                     \n"
++     // Store the general-purpose registers that we need to save
++     // per the above discussion.
++     // Note that x30 is the link register.
++     "  stp x19, x20, [%[_env], 0]     \n"
++     "  stp x21, x22, [%[_env], 0x10]  \n"
++     "  stp x23, x24, [%[_env], 0x20]  \n"
++     "  stp x25, x26, [%[_env], 0x30]  \n"
++     "  stp x27, x28, [%[_env], 0x40]  \n"
++     "  stp x29, x30, [%[_env], 0x50]  \n"
++     // Store the value of SP.
++     "  str x9,       [%[_env], 0x60]  \n"
++     :
++     // No outputs
++     :
++     // Inputs
++     [_env]"r"(_env)
++     :
++     // Clobbers.
++     // We have used x9 as a temporary
++     "x9",
++     // We have written to memory locations
++     "memory");
++
++  // Direct invokation of setjmp always returns 0.
++  // The pseudo returning of the value 1 as a return from longjmp
++  // is implemented in longjmp.
++  return 0;
++}
++
++__attribute__((noreturn))
++inline void VG_MINIMAL_LONGJMP(VG_MINIMAL_JMP_BUF(_env))
++{
++   asm volatile(
++     // Loads to match the stores in the above setjmp implementation.
++     "  ldp x19, x20, [%[_env], 0]     \n"
++     "  ldp x21, x22, [%[_env], 0x10]  \n"
++     "  ldp x23, x24, [%[_env], 0x20]  \n"
++     "  ldp x25, x26, [%[_env], 0x30]  \n"
++     "  ldp x27, x28, [%[_env], 0x40]  \n"
++     "  ldp x29, x30, [%[_env], 0x50]  \n"
++     "  ldr x9,       [%[_env], 0x60]  \n"
++     "  mov sp, x9                     \n"
++     // return as setjmp for the second time, returning 1.
++     // Since we have loaded the link register x30 from the saved buffer
++     // that was set by the above setjmp implementation, the 'ret' instruction
++     // here is going to return to where setjmp was called.
++     // Per the setjmp/longjmp contract, that pseudo second returning
++     // of setjmp should return the value 1.
++     // x0 is holds the integer return value.
++     "  mov x0, 1                      \n"
++     "  ret                            \n"
++     :
++     // No outputs
++     :
++     // Inputs
++     [_env]"r"(_env)
++     :
++     // Clobbers.
++     // We have used x9 as a temporary
++     "x9");
++
++  // This statement is unreachable because the above asm statement
++  // unconditionally does a 'ret' instruction. The purpose of this
++  // statement is to silence clang warnings about this function returning
++  // while having the 'noreturn' attribute.
++  __builtin_unreachable();
++}
++
+ #else
+ 
+ /* The default implementation. */
+ --

valgrind.spec

@@ -17,7 +17,7 @@
 
 Name:           valgrind
 Version:        3.16.0
-Release:        6
+Release:        7
 Epoch:          1
 Summary:        An instrumentation framework for building dynamic analysis tools
 License:        GPLv2+
@@ -31,6 +31,9 @@ Patch4:         backport-Generate-a-ENOSYS-sys_ni_syscall-for-clone3-on-all-linu
 Patch5:         valgrind-Implement-linux-rseq-syscall-as-ENOSYS.patch
 Patch6:         Add-LOONGARCH64-Linux-support.patch
 Patch7:         valgrind-Sync-LoongArch-with-glibc-2.36.patch
+%if "%{toolchain}" == "clang"
+Patch8:         Add-AArch64-clang-longjmp-support.patch
+%endif
 
 BuildRequires:  glibc glibc-devel gdb procps gcc-c++ perl(Getopt::Long)
 
@@ -52,12 +55,12 @@ This files contains the development files for %{name}.
 %autosetup -n %{name}-%{version} -p1
 
 %build
-CC=gcc
+CC=%{__cc}
 %ifarch x86_64
 mkdir -p shared/libgcc/32
 ar r shared/libgcc/32/libgcc_s.a
 ar r shared/libgcc/libgcc_s_32.a
-CC="gcc -B `pwd`/shared/libgcc/"
+CC="%{__cc} -B `pwd`/shared/libgcc/"
 %endif
 
 %undefine _hardened_build
@@ -108,6 +111,9 @@ popd
 %{_mandir}/man1/*
 
 %changelog
+* Tue Aug 29 2023 liyunfei <liyunfei33@huawei.com> - 1:3.16.0-7
+- Add clang compile support on AArch64
+
 * Tue Jan 03 2023 chenfeiyang <chenfeiyang@loongson.cn> - 1:3.16.0-6
 - Sync LoongArch with glibc 2.36