fix syntax error introduced by patch

Signed-off-by: Wenchao Hao <haowenchao@huawei.com>

0002-bugfix-sg3_utils-fix-syntax-error.patch

@@ -3,54 +3,33 @@ From: sunshihao <sunshihao@huawei.com>
 Date: Thu, 16 Apr 2020 10:53:25 +0800
 Subject: [PATCH 3/4] bugfix-sg3_utils-fix-syntax-error
 
+Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
 ---
- scripts/rescan-scsi-bus.sh | 10 +++++-----
+ scripts/rescan-scsi-bus.sh | 4 ++--
- 1 file changed, 5 insertions(+), 5 deletions(-)
+ 1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/scripts/rescan-scsi-bus.sh b/scripts/rescan-scsi-bus.sh
-index b1cbebc..25a5f2a 100755
+index b1cbebc..5f867c4 100755
 --- a/scripts/rescan-scsi-bus.sh
 +++ b/scripts/rescan-scsi-bus.sh
-@@ -83,10 +83,10 @@ findhosts ()
-   hosts=
-   for driverdir in /proc/scsi/*; do
-     driver=${driverdir#/proc/scsi/}
--    if [ "$driver" = scsi ] || [ "$driver" = sg ] || [ "$driver" = dummy ] || [ "$driver" = device_info  ] ; then continue; fi
-+    if [ "$driver" = xscsi ] || [ "$driver" = xsg ] || [ "$driver" = xdummy ] || [ "$driver" = xdevice_info  ] ; then continue; fi
-     for hostdir in $driverdir/*; do
-       name=${hostdir#/proc/scsi/*/}
--      if [ "$name" = add_map ] || [ "$name" = map ]  || [ "$name" = mod_parm ] ; then continue; fi
-+      if [ "$name" = xadd_map ] || [ "$name" = xmap ]  || [ "$name" = xmod_parm ] ; then continue; fi
-       num=$name
-       driverinfo=$driver
-       if [ -r "$hostdir/status" ] ; then
 @@ -289,7 +289,7 @@ testonline ()
      print_and_scroll_back "$host:$channel:$id:$lun $SGDEV ($RMB) "
      [ $RC = 2 ] && [ "$RMB" = "1" ] && break
    done
 -  if [ $ctr != 0 ] ; then
-+  if [ $xctr != x0 ] ; then
++  if [ "$ctr" != 0 ] ; then
      white_out
    fi
    # echo -e "\e[A\e[A\e[A${yellow}Test existence of $SGDEV = $RC ${norm} \n\n\n"
-@@ -569,7 +569,7 @@ dolunscan()
-       # Device not present
-       printf "\r\e[A";
-       # Optimization: if lun==0, stop here (only if in non-remove mode)
--      if [ "$lun" = 0 ] && [ -z "$remove" ] && [ "$optscan" = 1 ] ; then
-+      if [ x"$lun" = x0 ] && [ -z "$remove" ] && [ "x$optscan" = x1 ] ; then
-         return 1;
-       fi
-     else
 @@ -1283,7 +1283,7 @@ if [ "$sync" = 2 ] ; then
    echo "Syncing file systems"
    sync
  fi
 -if [ -w /sys/module/scsi_mod/parameters/default_dev_flags ] && [ $scan_flags != 0 ] ; then
-+if [ -w /sys/module/scsi_mod/parameters/default_dev_flags ] && [ x$scan_flags != x0 ] ; then
++if [ -w /sys/module/scsi_mod/parameters/default_dev_flags ] && [ "$scan_flags" != 0 ] ; then
    OLD_SCANFLAGS=$(cat /sys/module/scsi_mod/parameters/default_dev_flags)
    NEW_SCANFLAGS=$((OLD_SCANFLAGS|scan_flags))
    if [ "$OLD_SCANFLAGS" != "$NEW_SCANFLAGS" ] ; then
 -- 
-2.19.1
+2.35.3
 

sg3_utils.spec

@@ -1,6 +1,6 @@
 Name:    sg3_utils
 Version: 1.46
-Release: 4
+Release: 5
 Summary: Utilities that send SCSI commands to devices.
 License: GPL-2.0-or-later AND BSD
 URL:     http://sg.danny.cz/sg/sg3_utils.html
@@ -76,6 +76,9 @@ rm -rf $RPM_BUILD_ROOT/%{_libdir}/*.la
 %{_mandir}/man8/*
 
 %changelog
+* Fri Jul 1 2022 Wenchao Hao <haowenchao@huawei.com> -1.46-5
+- Fix grammar error in rescan-scsi-bus.sh introduced by patch
+
 * Thu Feb 17 2022 Wenchao Hao <haowenchao@huawei.com> -1.46-4
 - Fix grammar error in rescan-scsi-bus.sh