Package init

setserial-2.17-fhs.patch

@@ -0,0 +1,23 @@
+--- setserial-2.17/Makefile.in.fhs	Wed Jun 14 15:42:39 2000
++++ setserial-2.17/Makefile.in	Wed Jun 14 15:44:25 2000
+@@ -3,6 +3,8 @@
+ 
+ srcdir = @srcdir@
+ VPATH = @srcdir@
++bindir = @bindir@
++mandir = @mandir@
+ 
+ VERSION = @RELEASE_VERSION@
+ INSTALL = @INSTALL@
+@@ -26,9 +28,8 @@
+ 	nroff -man setserial.8 > setserial.cat
+ 
+ install: setserial setserial.8
+-	$(INSTALL_PROGRAM) setserial $(DESTDIR)/bin
+-	$(STRIP) $(DESTDIR)/bin/setserial
+-	$(INSTALL_DATA) setserial.8 $(DESTDIR)/usr/man/man8
++	$(INSTALL_PROGRAM) setserial $(DESTDIR)$(bindir)
++	$(INSTALL_DATA) setserial.8 $(DESTDIR)$(mandir)/man8
+ 
+ clean:
+ 	$(RM) setserial setserial.o setserial.cat *~

setserial-2.17-rc.patch

@@ -0,0 +1,65 @@
+--- setserial-2.17/rc.serial.rc	Thu Jan 27 15:47:30 2000
++++ setserial-2.17/rc.serial	Tue Sep 11 17:54:26 2001
+@@ -19,7 +19,7 @@
+ #
+ 
+ RCLOCKFILE=/var/lock/subsys/serial
+-DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
++DIRS="/lib/modules/`uname -r`/kernel/drivers/char /lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
+ PATH=/bin:/sbin:/usr/bin
+ DRIVER=serial
+ DRIVER_NAME=serial
+@@ -79,10 +79,11 @@
+ 
+ if test $action  = stop ; then
+ 	if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
+-           `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
++           "$(head -1 /etc/serial.conf 2>/dev/null)" = "###AUTOSAVE###" ; then
+ 		echo -n "Saving state of serial devices... "
+ 		grep "^#" /etc/serial.conf > /etc/.serial.conf.new
+-		${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
++		${SETSERIAL} -G -g ${ALLDEVS} \
++			2>/dev/null >> /etc/.serial.conf.new
+ 		mv /etc/serial.conf /etc/.serial.conf.old
+ 		mv /etc/.serial.conf.new /etc/serial.conf
+ 		echo "done."
+@@ -108,22 +109,26 @@
+ # If not stop, it must be a start....
+ #
+ 
+-if test -n $MODULE -a "$LOADED" != "yes" ; then 
++if test -n "$MODULE" -a "$LOADED" != "yes" ; then 
++	MAPFILE=$(mktemp /tmp/$DRIVER.map.XXXXXX) \
++	 || { echo "Couldn't create secure temporary file"; exit 1; }
++	ERRORS=$(mktemp /tmp/$DRIVER.XXXXXX) \
++	 || { echo "Couldn't create secure temporary file"; exit 1; }
+ 	if insmod -fm $MODULE $DRIVER_ARG \
+-		> /tmp/$DRIVER.map 2> /tmp/$DRIVER.$$; then :; 
++		> "${MAPFILE}" 2> "${ERRORS}"; then :; 
+ 	else
+ 		echo "Couldn't load $DRIVER_NAME driver."
+-		echo "See error logs in /tmp/$DRIVER.$$"
++		echo "See error logs in ${ERRORS}"
+ 		exit 1
+ 	fi
+-	/bin/rm -f /tmp/$DRIVER.$$
++	/bin/rm -f "${ERRORS}"
+ fi
+ 
+-if test -f /etc/serial.conf ; then
+-        if test -n ${SETSERIAL} ; then
++if test -f "/etc/serial.conf" ; then
++        if test -n "${SETSERIAL}" ; then
+ 		grep -v ^# < /etc/serial.conf | while read device args
+ 		do
+-		    ${SETSERIAL} -z $device $args
++		    ${SETSERIAL} -z $device $args 2>/dev/null
+ 		done 
+ 	fi
+ else
+@@ -131,4 +136,4 @@
+ fi
+ 
+ touch ${RCLOCKFILE}
+-${SETSERIAL} -bg ${ALLDEVS}
++${SETSERIAL} -bg ${ALLDEVS} 2>/dev/null

setserial-2.17-readme.patch

@@ -0,0 +1,11 @@
+--- setserial-2.17/README.readme	Tue Sep 11 17:59:52 2001
++++ setserial-2.17/README	Tue Sep 11 18:00:27 2001
+@@ -13,6 +13,6 @@
+ 
+ The simplest way to configure the serial ports is to copy the provided
+ rc.serial file to the appropriate /etc/rc.d directory.  For example,
+-to install rc.serial on a RedHat system, copy rc.serial to 
+-/etc/rc.d/init.d/serial, and then run the command "chkconfig -add serial".
++to install rc.serial on a Fedora system, copy rc.serial to 
++/etc/rc.d/init.d/serial, and then run the command "chkconfig --add serial".
+ 

setserial-2.17-spelling.patch

@@ -0,0 +1,11 @@
+--- setserial-2.17/setserial.c.spelling	2003-01-10 17:21:24.000000000 +0000
++++ setserial-2.17/setserial.c	2003-01-10 17:21:39.000000000 +0000
+@@ -707,7 +707,7 @@
+ 	fprintf(stderr, "\t  spd_warp\tuse 460kb instead of 38.4kb\n");
+ 	fprintf(stderr, "\t  spd_cust\tuse the custom divisor to set the speed at 38.4kb\n");
+ 	fprintf(stderr, "\t\t\t\t(baud rate = baud_base / custom_divisor)\n");
+-	fprintf(stderr, "\t  spd_normal\tuse 38.4kb when a buad rate of 38.4kb is selected\n");
++	fprintf(stderr, "\t  spd_normal\tuse 38.4kb when a baud rate of 38.4kb is selected\n");
+ 	fprintf(stderr, "\n");
+ 	fprintf(stderr, "Use a leading '0x' for hex numbers.\n");
+ 	fprintf(stderr, "CAUTION: Using an invalid port can lock up your machine!\n");

setserial-hayesesp.patch

@@ -0,0 +1,30 @@
+diff -up setserial-2.17/setserial.c.hayesesp setserial-2.17/setserial.c
+--- setserial-2.17/setserial.c.hayesesp	2010-02-15 12:20:59.104048442 +0000
++++ setserial-2.17/setserial.c	2010-02-15 12:21:42.368924088 +0000
+@@ -356,7 +356,7 @@ void set_multiport(char *device, int fd,
+ }
+ #endif
+ 
+-#ifdef TIOCGHAYESESP
++#if defined(TIOCGHAYESESP) && defined(HAVE_LINUX_HAYESESP_H)
+ void print_hayesesp(int fd)
+ {
+ 	struct hayes_esp_config esp;
+@@ -453,7 +453,7 @@ void get_serial(char *device)
+ 		print_flags(&serinfo, "\tFlags: ", "");
+ 		printf("\n\n");
+ 
+-#ifdef TIOCGHAYESESP
++#if defined(TIOCGHAYESESP) && defined(HAVE_LINUX_HAYESESP_H)
+ 		print_hayesesp(fd);
+ #endif
+ 	} else if (verbosity==0) {
+@@ -593,7 +593,7 @@ void set_serial(char *device, char ** ar
+ 			}
+ 			set_multiport(device, fd, &arg);
+ 			break;
+-#ifdef TIOCGHAYESESP
++#if defined(TIOCGHAYESESP) && defined(HAVE_LINUX_HAYESESP_H)
+ 		case CMD_RX_TRIG:
+ 		case CMD_TX_TRIG:
+ 		case CMD_FLOW_OFF:

setserial.spec

@@ -0,0 +1,55 @@
+%define _bindir /bin
+Name:            setserial
+Version:         2.17
+Release:         48
+Summary:         A utility for configuring serial ports
+License:         GPL+	
+URL:             https://setserial.sourceforge.net
+Source0:         https://sourceforge.net/projects/setserial/files/setserial/%{version}/%{name}-%{version}.tar.gz
+
+# https://sourceforge.net/p/setserial/patches/
+Patch0:          setserial-2.17-fhs.patch
+Patch1:          setserial-2.17-rc.patch
+# https://src.fedoraproject.org/rpms/setserial/tree/
+Patch2:          setserial-2.17-readme.patch
+Patch3:          setserial-2.17-spelling.patch
+Patch4:          setserial-hayesesp.patch
+Patch5:          setserial-aarch64.patch
+
+BuildRequires:   gcc groff git
+
+%description
+setserial is a program designed to set and/or report the
+configuration information associated with a serial port.
+
+%package_help
+
+%prep
+%autosetup -n %{name}-%{version} -p1 -S git
+
+%build
+%set_build_flags
+CFLAGS="$CFLAGS $LDFLAGS"
+%configure
+%make_build
+
+%install
+install -d %{buildroot}/%{_bindir}
+install -d %{buildroot}/%{_mandir}/man8
+
+%make_install
+
+%files
+%defattr(-,root,root)
+%doc  rc.serial
+%{_bindir}/setserial
+
+%files help
+%defattr(-,root,root)
+%doc README
+%{_mandir}/man*/*.gz
+
+%changelog
+* Fri Sep 06 2019 openEuler Buildteam <buildteam@openeuler.org> - 2.17-48
+- Package init
+