When the guest invalidates one S1 entry, it passes the asid.
When propagating this invalidation downto the host, the asid
information also must be passed. So let's fill the arch_id field
introduced for that purpose and accordingly set the flags to
indicate its presence.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
For VFIO integration we will need to pass the Context Descriptor (CD)
table GPA to the host. The CD table is also referred to as the PASID
table. Its GPA corresponds to the s1ctrptr field of the Stream Table
Entry. So let's decode and store it in the configuration structure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
The SMMUv3 has the peculiarity to translate MSI
transactionss. let's advertise the corresponding
attribute.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Whenever the eventfd is triggered, we retrieve the DMA fault(s)
from the mmapped fault region and inject them in the iommu
memory region.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Set up the fault region which is composed of the actual fault
queue (mmappable) and a header used to handle it. The fault
queue is mmapped.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
We use the new extended IRQ VFIO_IRQ_TYPE_NESTED type and
VFIO_IRQ_SUBTYPE_DMA_FAULT subtype to set/unset
a notifier for physical DMA faults. The associated eventfd is
triggered, in nested mode, whenever a fault is detected at IOMMU
physical level.
The actual handler will be implemented in subsequent patches.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
As done for vfio regions, add helpers to retrieve irq info
including their optional capabilities.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
We register the stage1 MSI bindings when enabling the vectors
and we unregister them on msi disable.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
In nested mode, legacy vfio_iommu_map_notify cannot be used as
there is no "caching" mode and we do not trap on map.
On Intel, vfio_iommu_map_notify was used to DMA map the RAM
through the host single stage.
With nested mode, we need to setup the stage 2 and the stage 1
separately. This patch introduces a prereg_listener to setup
the stage 2 mapping.
The stage 1 mapping, owned by the guest, is passed to the host
when the guest invalidates the stage 1 configuration, through
a dedicated PCIPASIDOps callback. Guest IOTLB invalidations
are cascaded downto the host through another IOMMU MR UNMAP
notifier.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Let's introduce two helpers that allow to DMA map/unmap a RAM
section. Those helpers will be called for nested stage setup in
another call site. Also the vfio_listener_region_add/del()
structure may be clearer.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Let's introduce a hostwin_from_range() helper that returns the
hostwin encapsulating an IOVA range or NULL if none is found.
This improves the readibility of callers and removes the usage
of hostwin_found.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
In case we detect the address space is translated by
a virtual IOMMU which requires HW nested paging to
integrate with VFIO, let's set up the container with
the VFIO_TYPE1_NESTING_IOMMU iommu_type.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
This patch introduces PCIPASIDOps for IOMMU related operations.
https://lists.gnu.org/archive/html/qemu-devel/2018-03/msg00078.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2018-03/msg00940.html
So far, to setup virt-SVA for assigned SVA capable device, needs to
configure host translation structures for specific pasid. (e.g. bind
guest page table to host and enable nested translation in host).
Besides, vIOMMU emulator needs to forward guest's cache invalidation
to host since host nested translation is enabled. e.g. on VT-d, guest
owns 1st level translation table, thus cache invalidation for 1st
level should be propagated to host.
This patch adds two functions: alloc_pasid and free_pasid to support
guest pasid allocation and free. The implementations of the callbacks
would be device passthru modules. Like vfio.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
This header is meant to exposes data types used by
several IOMMU devices such as struct for SVA and
nested stage configuration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
This new API allows to inject @count iommu_faults into
the IOMMU memory region.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
We introduce a new IOMMU Memory Region attribute, IOMMU_ATTR_MSI_TRANSLATE
which tells whether the virtual IOMMU translates MSIs. ARM SMMU
will expose this attribute since, as opposed to Intel DMAR, MSIs
are translated as any other DMA requests.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
We introduce a new IOMMU Memory Region attribute,
IOMMU_ATTR_VFIO_NESTED that tells whether the virtual IOMMU
requires HW nested paging for VFIO integration.
Current Intel virtual IOMMU device supports "Caching
Mode" and does not require 2 stages at physical level to be
integrated with VFIO. However SMMUv3 does not implement such
"caching mode" and requires to use HW nested paging.
As such SMMUv3 is the first IOMMU device to advertise this
attribute.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
NH_ALL/NSNH_ALL corresponds to a domain granularity invalidation,
ie. all the notifier range gets invalidation, whatever the ASID.
So let's set the granularity to IOMMU_INV_GRAN_DOMAIN to allow
the consumer to benefit from the info if it can.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: chenxiang (M) <chenxiang66@hisilicon.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
At the moment ASID invalidation command (CMD_TLBI_NH_ASID) is
propagated as a domain invalidation (the whole notifier range
is invalidated independently on any ASID information).
The new granularity field now allows to be more precise and
restrict the invalidation to a peculiar ASID. Set the corresponding
fields and flag.
We still keep the iova and addr_mask settings for consumers that
do not support the new fields, like VHOST.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
The current IOTLBEntry becomes too simple to interact with
some physical IOMMUs. IOTLBs can be invalidated with different
granularities: domain, pasid, addr. Current IOTLB entry only offers
page selective invalidation. Let's add a granularity field
that conveys this information.
TLB entries are usually tagged with some ids such as the asid
or pasid. When propagating an invalidation command from the
guest to the host, we need to pass those IDs.
Also we add a leaf field which indicates, in case of invalidation
notification, whether only cache entries for the last level of
translation are required to be invalidated.
A flag field is introduced to inform whether those fields are set.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Update the script to import the new iommu.h uapi header.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
We currently trace vfio_disconnect_container() but we do not trace
the container <-> group creation, which can be useful to understand
the VFIO topology.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Ensure the vSMMUv3 will be restored before all PCIe devices so that DMA
translation can work properly during migration.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20201019091508.197-1-yuzenghui@huawei.com
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
The driver can query some bits in SMMUv3 IDR5 to learn which
translation granules are supported. Arm recommends that SMMUv3
implementations support at least 4K and 64K granules. But in
the vSMMUv3, there seems to be no reason not to support 16K
translation granule. In addition, if 16K is not supported,
vSVA will failed to be enabled in the future for 16K guest
kernel. So it'd better to support it.
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new capability VFIO_DIRTY_LOG_MANUAL_CLEAR and the new ioctl
VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP_NOCLEAR and
VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP have been introduced in
the kernel, tweak the userspace side to use them.
Check if the kernel supports VFIO_DIRTY_LOG_MANUAL_CLEAR and
provide the log_clear() hook for vfio_memory_listener. If the
kernel supports it, deliever the clear message to kernel.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
When synchronizing dirty bitmap from kernel VFIO we do it in a
per-iova-range fashion and we allocate the userspace bitmap for each of the
ioctl. This patch introduces `struct VFIODMARange` to describe a range of
the given DMA mapping with respect to a VFIO_IOMMU_MAP_DMA operation, and
make the bitmap cache of this range be persistent so that we don't need to
g_try_malloc0() every time. Note that the new structure is almost a copy of
`struct vfio_iommu_type1_dma_map` but only internally used by QEMU.
More importantly, the cached per-iova-range dirty bitmap will be further
used when we want to add support for the CLEAR_BITMAP and this cached
bitmap will be used to guarantee we don't clear any unknown dirty bits
otherwise that can be a severe data loss issue for migration code.
It's pretty intuitive to maintain a bitmap per container since we perform
log_sync at this granule. But I don't know how to deal with things like
memory hot-{un}plug, sparse DMA mappings, etc. Suggestions welcome.
* yet something to-do:
- can't work with guest viommu
- no locks
- etc
[ The idea and even the commit message are largely inherited from kvm side.
See commit 9f4bf4baa8b820c7930e23c9566c9493db7e1d25. ]
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kunkun Jiang <jinagkunkun@huawei.com>
The new capability VFIO_DIRTY_LOG_MANUAL_CLEAR and the new ioctl
VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP_NOCLEAR and
VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP have been introduced in
the kernel, update the header to add them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
There is an extra log "error_setg" in qdev_add_device(). When
hot-plug a device, if the corresponding bus doesn't exist, it
will trigger an asseration "assert(*errp == NULL)".
Fixes: 515a7970490 (log: Add some logs on VM runtime path)
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Starting from pss->page, ram_save_host_page() will check every page
and send the dirty pages up to the end of the current host page or
the boundary of used_length of the block. If the host page size is
a huge page, the step "check" will take a lot of time.
It will improve performance to use migration_bitmap_find_dirty().
Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G)
The time of ram_save_host_page() in the last round of ram saving:
before optimize: 9250us after optimize: 34us
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When the host page is a huge page and something is sent in the
current iteration, migration_rate_limit() should be executed.
If not, it can be omitted.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In the vfio_migration_init(), the SaveVMHandler is registered for
VFIO device. But it lacks the operation of 'unregister'. It will
lead to 'Segmentation fault (core dumped)' in
qemu_savevm_state_setup(), if performing live migration after a
VFIO device is hot deleted.
Fixes: cd5b58f2ba (vfio: Register SaveVMHandlers for VFIO device)
Reported-by: Qixin Gan <ganqixin@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-Id: <20210527123101.289-1-jiangkunkun@huawei.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For now the switch of vfio dirty page tracking is integrated into
@vfio_save_handler. The reason is that some PCI vendor driver may
start to track dirty base on _SAVING state of device, so if dirty
tracking is started before setting device state, vfio will report
full-dirty to QEMU.
However, the dirty bmap of all ramblocks are fully set when setup
ram saving, so it's not matter whether the device is in _SAVING
state when start vfio dirty tracking.
Moreover, this logic causes some problems [1]. The object of dirty
tracking is guest memory, but the object of @vfio_save_handler is
device state, which produces unnecessary coupling and conflicts:
1. Coupling: Their saving granule is different (perVM vs perDevice).
vfio will enable dirty_page_tracking for each devices, actually
once is enough.
2. Conflicts: The ram_save_setup() traverses all memory_listeners
to execute their log_start() and log_sync() hooks to get the
first round dirty bitmap, which is used by the bulk stage of
ram saving. However, as vfio dirty tracking is not yet started,
it can't get dirty bitmap from vfio. Then we give up the chance
to handle vfio dirty page at bulk stage.
Move the switch of vfio dirty_page_tracking into vfio_memory_listener
can solve above problems. Besides, Do not require devices in SAVING
state for vfio_sync_dirty_bitmap().
[1] https://www.spinics.net/lists/kvm/msg229967.html
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210309031913.11508-1-zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
The cpu_physical_memory_set_dirty_lebitmap() can quickly deal with
the dirty pages of memory by bitmap-traveling, regardless of whether
the bitmap is aligned correctly or not.
cpu_physical_memory_set_dirty_lebitmap() supports pages in bitmap of
host page size. So it'd better to set bitmap_pgsize to host page size
to support more translation granule sizes.
[aw: The Fixes commit below introduced code to restrict migration
support to configurations where the target page size intersects the
host dirty page support. For example, a 4K guest on a 4K host.
Due to the above flexibility in bitmap handling, this restriction
unnecessarily prevents mixed target/host pages size that could
otherwise be supported. Use host page size for dirty bitmap.]
Fixes: fc49c9cbf2 ("vfio: Get migration capability flags for container")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-Id: <20210304133446.1521-1-jiangkunkun@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kvm: split too big memory section on several memslots
kvm: Reallocate dirty_bmap when we change a slot
accel: kvm: Fix memory waste under mismatch page size
memory: Skip dirty tracking for un-migratable memory regions
Fix use after free in vfio_migration_probe
vfio: Make migration support experimental
vfio: Change default dirty pages tracking behavior during migration
vfio: Fix vfio_listener_log_sync function name typo
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
There is an obvious typo in the function name of the .log_sync() callback.
Spell it correctly.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204014240.772-1-yuzenghui@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
By default dirty pages tracking is enabled during iterative phase
(pre-copy phase).
Added per device opt-out option 'x-pre-copy-dirty-page-tracking' to
disable dirty pages tracking during iterative phase. If the option
'x-pre-copy-dirty-page-tracking=off' is set for any VFIO device, dirty
pages tracking during iterative phase will be disabled.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Support for migration of vfio devices is still in flux. Developers
are attempting to add support for new devices and new architectures,
but none are yet readily available for validation. We have concerns
whether we're transferring device resources at the right point in the
migration, whether we're guaranteeing that updates during pre-copy are
migrated, and whether we can provide bit-stream compatibility should
any of this change. Even the question of whether devices should
participate in dirty page tracking during pre-copy seems contentious.
In short, migration support has not had enough soak time and it feels
premature to mark it as supported.
Create an experimental option such that we can continue to develop.
[Retaining previous acks/reviews for a previously identical code
change with different specifics in the commit log.]
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
It makes no sense to track dirty pages for those un-migratable memory
regions (e.g., Memory BAR region of the VFIO PCI device) and doing so
will potentially lead to some unpleasant issues during migration [1].
Skip dirty tracking for those regions by evaluating if the region is
migratable before setting dirty_log_mask (DIRTY_MEMORY_MIGRATION).
[1] https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg03757.html
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201116132210.1730-1-yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
When handle dirty log, we face qemu_real_host_page_size and
TARGET_PAGE_SIZE. The first one is the granule of KVM dirty
bitmap, and the second one is the granule of QEMU dirty bitmap.
As qemu_real_host_page_size >= TARGET_PAGE_SIZE (kvm_init()
enforced it), misuse TARGET_PAGE_SIZE to init kvmslot dirty_bmap
may waste memory. For example, when qemu_real_host_page_size is
64K and TARGET_PAGE_SIZE is 4K, it wastes 93.75% (15/16) memory.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201217014941.22872-2-zhukeqian1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
kvm_set_phys_mem can be called to reallocate a slot by something the
guest does (e.g. writing to PAM and other chipset registers).
This can happen in the middle of a migration, and if we're unlucky
it can now happen between the split 'sync' and 'clear'; the clear
asserts if there's no bmap to clear. Recreate the bmap whenever
we change the slot, keeping the clear path happy.
Typically this is triggered by the guest rebooting during a migrate.
Corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1772774https://bugzilla.redhat.com/show_bug.cgi?id=1771032
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Max memslot size supported by kvm on s390 is 8Tb,
move logic of splitting RAM in chunks upto 8T to KVM code.
This way it will hide KVM specific restrictions in KVM code
and won't affect board level design decisions. Which would allow
us to avoid misusing memory_region_allocate_system_memory() API
and eventually use a single hostmem backend for guest RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-4-imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
vfio: Move the saving of the config space to the right place in VFIO migration
vfio: Set the priority of the VFIO VM state change handler explicitly
vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration
Signed-off-by: Chen Qun<kuhn.chenqun@huawei.com>
In VFIO migration resume phase and some guest startups, there are
already unmasked vectors in the vector table when calling
vfio_msix_enable(). So in order to avoid inefficiently disabling
and enabling vectors repeatedly, let's allocate all needed vectors
first and then enable these unmasked vectors one by one without
disabling.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Message-Id: <20210310030233.1133-4-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the VFIO VM state change handler when stopping the VM, the _RUNNING
bit in device_state is cleared which makes the VFIO device stop, including
no longer generating interrupts. Then we can save the pending states of
all interrupts in the GIC VM state change handler (on ARM).
So we have to set the priority of the VFIO VM state change handler
explicitly (like virtio devices) to ensure it is called before the
GIC's in saving.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210310030233.1133-3-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
