# -*- rpm-spec -*- # Default to skipping autoreconf. Distros can change just this one line # (or provide a command-line override) if they backport any patches that # touch configure.ac or Makefile.am. %{!?enable_autotools:%global enable_autotools 1} # The hypervisor drivers that run in libvirtd %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:0} %define with_libxl 0%{!?_without_libxl:0} %define with_vbox 0%{!?_without_vbox:0} %define with_qemu_tcg %{with_qemu} %define qemu_kvm_arches %{ix86} x86_64 aarch64 %ifarch %{qemu_kvm_arches} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:0} %define with_vmware 0%{!?_without_vmware:0} %define with_esx 0%{!?_without_esx:0} %define with_hyperv 0%{!?_without_hyperv:0} # Then the secondary host drivers, which run inside libvirtd %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:0} %define with_storage_gluster 0%{!?_without_storage_gluster:1} %define with_numactl 0%{!?_without_numactl:1} # Numactl is not available on many non-x86 archs %ifarch %{arm} riscv64 %define with_numactl 0 %endif %define with_storage_zfs 0%{!?_without_storage_zfs:1} %ifarch aarch64 x86_64 %define with_storage_zfs 0 %endif %define arg_dtrace --without-dtrace # We need a recent enough libiscsi (>= 1.18.0) %define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1} # A few optional bits off by default, we enable later %define with_fuse 0%{!?_without_fuse:0} %define with_sanlock 0%{!?_without_sanlock:1} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:1} %define with_firewalld_zone 0%{!?_without_firewalld_zone:1} %define with_libssh2 0%{!?_without_libssh2:1} %define with_wireshark 0%{!?_without_wireshark:1} %define with_libssh 0%{!?_without_libssh:1} %define with_bash_completion 0%{!?_without_bash_completion:1} # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch %{ix86} x86_64 ia64 %define with_libxl 0 %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif %define with_bash_completion 0%{!?_without_bash_completion:1} # Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer %define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan %if %{with_qemu} || %{with_lxc} # numad is used to manage the CPU and memory placement dynamically, # it's not available on many non-x86 architectures. %ifnarch s390 s390x %{arm} riscv64 %define with_numad 0%{!?_without_numad:1} %endif %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu %define enable_werror --enable-werror %define tls_priority "@LIBVIRT,SYSTEM" Summary: Library providing a simple virtualization API Name: libvirt Version: 6.2.0 Release: 46 License: LGPLv2+ URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Patch0000: libvirt-qemu-fix-potential-memory-leak.patch Patch0001: libvirt-qemu-add-pointer-check-in-qemuMonitorLastError.patch Patch0002: libvirt-qemu-fix-a-concurrent-operation-situation.patch Patch0003: libvirt-cgroup-cleanup-eventParams-when-virTypedParamsAddULL.patch Patch0004: libvirt-nodedev-fix-potential-heap-use-after-free.patch Patch0005: libvirt-po-Refresh-translation-for-running-state.patch Patch0006: libvirt-cpu_map-Introduce-arm-CPU-models.patch Patch0007: libvirt-cpu-introduce-virCPUarmData-to-virCPUData.patch Patch0008: libvirt-cpu-arm-add-cpu-data-free-function-to-virCPUarmDataF.patch Patch0009: libvirt-cpu-arm-add-load-cpu-map-parse-function.patch Patch0010: libvirt-cpu-arm-add-decode-function.patch Patch0011: libvirt-cpu-arm-add-virCPUarmGetHost-implment.patch Patch0012: libvirt-cpu-arm-implment-cpu-baseline-function.patch Patch0013: libvirt-cpu-arm-implment-cpu-compare-function.patch Patch0014: libvirt-tests-add-cpu-compare-test-cases-for-arm-CPU.patch Patch0015: libvirt-tests-add-baseline-test-cases-for-arm-CPU.patch Patch0016: libvirt-util-virdaemon-fix-waiting-for-child-processes.patch Patch0017: libvirt-virsh-Fix-return-code-for-dump-and-migrate.patch Patch0018: libvirt-virsh-Fix-return-code-for-dump.patch Patch0019: libvirt-cpu-aarch64-enable-host-model-cpu-for-AArch64-archit.patch Patch0020: libvirt-cpu_map-add-kunpeng-920-features-as-known-features.patch Patch0021: libvirt-Substitute-security_context_t-with-char.patch Patch0022: libvirt-conf-Don-t-format-http-cookies-unless-VIR_DOMAIN_DEF.patch Patch0023: libvirt-virstoragetest-testBackingParse-Use-VIR_DOMAIN_DEF_F.patch Patch0024: libvirt-support-aarch64-vtpm-with-parameter-tpm-tis-.patch Patch0025: libvirt-tests-commandtest-skip-the-test4-if-the-testcase-is-.patch Patch0026: libvirt-remote-fix-driver-name-check-for-libxl-driver.patch Patch0027: libvirt-systemd-start-libvirtd-after-firewalld-iptables-serv.patch Patch0028: libvirt-qemuDomainCleanupRun-Actually-run-cleanup-callbacks-.patch Patch0029: libvirt-virDevMapperGetTargetsImpl-quit-early-if-device-is-n.patch Patch0030: libvirt-qemu-only-stop-external-devices-after-the-domain.patch Patch0031: libvirt-qemuDomainStorageSourcePrivateDispose-Free-httpcooki.patch Patch0032: libvirt-Don-t-require-secdrivers-to-implement-.domainMoveIma.patch Patch0033: libvirt-qemuProcessStop-Use-XATTRs-to-restore-seclabels-on-d.patch Patch0034: libvirt-qemuProcessStop-Reattach-NVMe-disks-a-domain-is-mirr.patch Patch0035: libvirt-security-don-t-fail-if-built-without-attr-support.patch Patch0036: libvirt-qemu-Skip-pre-creation-of-NVMe-disks.patch Patch0037: libvirt-Fix-some-wrong-usage-of-ATTRIBUTE_NONNULL.patch Patch0038: libvirt-conf-Increase-cpuset-length-limit-for-CPU-pinning.patch Patch0039: libvirt-virQEMUDriverConfigNew-Add-slash-to-cfg-defaultTLSx5.patch Patch0040: libvirt-qemuDomainSetNumaParamsLive-set-nodeset-for-root-cgr.patch Patch0041: libvirt-qemu-do-not-add-model-when-actual-iface-type-is-host.patch Patch0042: libvirt-qemu-pre-create-the-dbus-directory-in-qemuStateIniti.patch Patch0043: libvirt-conf-vmx-check-for-OOM-after-calling-xmlBufferCreate.patch Patch0044: libvirt-leaseshelper-Wait-to-acquire-PID-file.patch Patch0045: libvirt-leaseshelper-Report-more-errors.patch Patch0046: libvirt-qemuBuildMemoryBackendProps-Use-boolean-type-for-pme.patch Patch0047: libvirt-qemu-format-ramfb-attribute-for-mediated-devices.patch Patch0048: libvirt-resctrl-Do-not-open-directory-for-writing.patch Patch0049: libvirt-libxl-fix-crash-when-initializing-driver.patch Patch0050: libvirt-util-fix-iteration-in-virSocketAddrResolveService.patch Patch0051: libvirt-qemu-fix-hang-in-p2p-xbzrle-compression-parallel-mig.patch Patch0052: libvirt-qemu-Revoke-access-to-mirror-on-failed-blockcopy.patch Patch0053: libvirt-qemuDomainDefPostParse-Fail-if-unable-to-fill-machin.patch Patch0054: libvirt-virNetDevGetFamilyId-Change-signature.patch Patch0055: libvirt-virNetDevSwitchdevFeature-Make-failure-to-get-family.patch Patch0056: libvirt-qemuDomainGetUnplugTimeout-Add-G_GNUC_NO_INLINE.patch Patch0057: rpc-gendispatch-handle-empty-flags.patch Patch0058: rpc-add-support-for-filtering-acls-by-uint-params.patch Patch0059: rpc-require-write-acl-for-guest-agent-in-virDomainIn.patch Patch0060: qemu-agent-set-ifname-to-NULL-after-freeing.patch Patch0061: util-Move-virIsDevMapperDevice-to-virdevmapper.c.patch Patch0062: virdevmapper-Don-t-use-libdevmapper-to-obtain-depend.patch Patch0063: libvirt-Add-retry-support-for-error-policy.patch Patch0064: qemu-Support-retry-BLOCK_IO_ERROR-event.patch Patch0065: add-phytium-2000plus-and-s2500-support-on-arm-archit.patch Patch0066: libvirt-conf-Set-default-values-of-retry-fileds.patch Patch0067: tests-fix-stat-mocking-with-Fedora-rawhide.patch Patch0068: cpu_map-Add-Cooperlake-x86-CPU-model.patch Patch0069: cpu_map-Add-pschange-mc-no-bit-in-IA32_ARCH_CAPABILI.patch Patch0070: cpu_map-Distribute-x86_Cooperlake.xml.patch Patch0071: Don-t-cache-device-mapper-major.patch Patch0072: virdevmapper-Handle-kernel-without-device-mapper-sup.patch Patch0073: virDevMapperGetTargets-Don-t-ignore-EBADF.patch Patch0074: conf-domain_conf-pin-the-retry_interval-and-retry_ti.patch Patch0075: storage_driver-Unlock-object-on-ACL-fail-in-storageP.patch Patch0076: security-fix-SELinux-label-generation-logic.patch Patch0077: Hotpatch-introduce-DomainHotpatchManage-API.patch Patch0078: hotpatch-Implement-qemuDomainHotpatchManage.patch Patch0079: hotpatch-introduce-hotpatch-async-job-flag.patch Patch0080: hotpatch-implement-hotpatch-virsh-api.patch Patch0081: hotpatch-check-vm-id-and-pid-before-using-hotpatch-a.patch Patch0082: domain-add-logs-for-virDomainHotpatchManage.patch Patch0083: docs-build-Don-t-include-stylesheet-in-intermediate-.patch Patch0084: tests-Replace-deprecated-ASN1-code.patch Patch0085: tests-disabale-storage-tests.patch Patch0086: Revert-tests-disabale-storage-tests.patch Patch0087: hotpatch-virsh-support-autoload-mode.patch Patch0088: virQEMUBuildCommandLineJSON-Allow-skipping-certain-k.patch Patch0089: virQEMUBuildCommandLineJSON-Add-possibility-for-usin.patch Patch0090: util-virqemu-Introduce-virQEMUBuildNetdevCommandline.patch Patch0091: util-json-Introduce-virJSONValueObjectAppendStringPr.patch Patch0092: qemuBuildChannelsCommandLine-Use-typecasted-switch-f.patch Patch0093: qemuBuildChannelsCommandLine-Extract-common-formatti.patch Patch0094: qemuBuildChannelChrDeviceStr-Remove-formatting-of-pr.patch Patch0095: qemuMonitorJSON-Add-Remove-Netdev-Refactor-cleanup.patch Patch0096: qemuBuildHostNetStr-Stop-using-ipv6-net-convenience-.patch Patch0097: qemu-command-Generate-netdev-command-line-via-JSON-c.patch Patch0098: qemuBuildChannelGuestfwdNetdevProps-Convert-to-gener.patch Patch0099: qemuMonitorAddNetdev-Convert-to-the-native-JSON-prop.patch Patch0100: virCommand-Introduce-virCommandGetArgList.patch Patch0101: testutilsqemuschema-Introduce-testQEMUSchemaValidate.patch Patch0102: testCompareXMLToArgv-Split-out-preparation-and-comma.patch Patch0103: virQEMUBuildNetdevCommandlineFromJSON-Prepare-for-qu.patch Patch0104: qemu-Prepare-for-testing-of-netdev_add-props-via-qem.patch Patch0105: qemuxml2argvtest-Add-QAPI-QMP-schema-validation-for-.patch Patch0106: qemu-Probe-for-a-few-params-supported-by-migrate-set.patch Patch0107: qemu-Avoid-deprecated-migrate_set_speed-QMP-command.patch Patch0108: qemu-Avoid-deprecated-migrate_set_downtime-QMP-comma.patch Patch0109: qemu-Avoid-deprecated-query-migrate-cache-size-QMP-c.patch Patch0110: qemu-Avoid-deprecated-migrate-set-cache-size-QMP-com.patch Patch0111: qemu-Track-numa-mem-supported-machine-attribute.patch Patch0112: qemuBuildNumaArgStr-Switch-order-of-if-and-for.patch Patch0113: qemuBuildNumaArgStr-Use-modern-numa-memdev-if-old-nu.patch Patch0114: Revert-libvirt-support-aarch64-vtpm-with-parameter-t.patch Patch0115: qemu-Fix-swtpm-device-with-aarch64.patch Patch0116: qemu-Fix-libvirt-hang-due-to-early-TPM-device-stop.patch Patch0117: qemu_tpm-Move-logfile-path-generation-into-a-separat.patch Patch0118: qemu_tpm-Generate-log-file-path-among-with-storage-p.patch Patch0119: virtpm-Fix-path-handling-in-virTPMEmulatorInit.patch Patch0120: qemuMonitorJSONSetMigrationParams-Take-double-pointe.patch Patch0121: qemuMonitorJSONAddObject-Take-double-pointer-for-pro.patch Patch0122: qemuMonitorJSONMakeCommandInternal-Clear-arguments-w.patch Patch0123: qemuMonitorAddObject-Fix-semantics-of-alias.patch Patch0124: qemuMonitorAddObject-Refactor-cleanup.patch Patch0125: util-json-Replace-virJSONValueObjectSteal-by-virJSON.patch Patch0126: qemu-command-Generate-commandline-of-masterKey0-secr.patch Patch0127: qemu-command-Generate-commandline-of-sev0-sev-guest-.patch Patch0128: qemu-command-Generate-commandline-of-iothread-object.patch Patch0129: qemu-capabilities-Introduce-QEMU_CAPS_OBJECT_QAPIFIE.patch Patch0130: qemu-monitor-Make-wrapping-of-props-of-object-add-op.patch Patch0131: qemuMonitorCreateObjectPropsWrap-Open-code-in-qemuBu.patch Patch0132: qemu-monitor-Don-t-add-props-wrapper-if-qemu-has-QEM.patch Patch0133: qemu-command-Use-JSON-for-QAPIfied-object-directly.patch Patch0134: tests-qemuxml2argv-Validate-generation-of-JSON-props.patch Patch0135: qemu-capabilities-Enable-detection-of-QEMU_CAPS_OBJE.patch Patch0136: apparmor-Permit-new-capabilities-required-by-libvirt.patch Patch0137: virsh-Display-vhostuser-socket-path-in-domblklist.patch Patch0138: sw_64-Add-sw64-architecture-support.patch Patch0139: src-workaround-warning-triggered-in-glib-2.69.patch Patch0140: nwfilter-fix-crash-when-counting-number-of-network-f.patch Patch0141: apibuild-Fix-self.waring-method-call.patch Patch0142: qemu-Add-missing-lock-in-qemuProcessHandleMonitorEOF.patch Patch0143: util-avoid-race-in-releasing-the-GSource-in-event-th.patch Patch0144: test-Fix-memory-leak-in-testParseXMLDocFromFile.patch Patch0145: lxc-Fix-memory-leak-in-virLXCControllerPopulateDevic.patch Patch0146: util-Fix-memory-leak-in-virAuthConfigLookup.patch Patch0147: util-Fix-memory-leak-in-virAuthGetCredential.patch Patch0148: qemu_security-Complete-renaming-of-virSecurityManage.patch Patch0149: virSecurityManagerMetadataLock-Ignore-RO-filesystem.patch Patch0150: virSecurityManagerMetadataLock-Clarify-directory-loc.patch Patch0151: qemu-Use-qemuSecurityDomainSetPathLabel-to-set-secla.patch Patch0152: qemu-Drop-unused-qemuSecuritySetSavedStateLabel.patch Patch0153: qemu-don-t-shutdown-event-thread-in-monitor-EOF-call.patch Patch0154: cpu_map-Fix-Icelake-Server-model-number.patch Patch0155: rpc-avoid-crash-when-system-time-jump-back.patch Patch0156: check-for-NULL-before-calling-g_regex_unref.patch Patch0157: qemu_monitor-Document-qemuMonitorUnregister.patch Patch0158: storageBackendProbeTarget-Don-t-fail-if-backing-stor.patch Patch0159: virPipeImpl-Don-t-overwrite-error.patch Patch0160: virBufferAdd-Ensure-that-the-buffer-is-initialized-a.patch Patch0161: qemuMigrationSrcRun-Don-t-jump-to-exit_monitor-from-.patch Patch0162: util-Fix-error-reporting-in-virnetlink.patch Patch0163: locking-Resolve-mem-leak-in-virLockDaemonPreExecRest.patch Patch0164: qemu_conf-Fix-double-free-problem-for-cfg-firmwares.patch Patch0165: qemuDomainCheckpointLoad-Don-t-align-disks-when-rest.patch Patch0166: leaseshelper-Report-errors-on-failure.patch Patch0167: networkGetDHCPLeases-Use-VIR_APPEND_ELEMENT-instead-.patch Patch0168: qemuFirmwareFillDomain-Fill-NVRAM-template-on-migrat.patch Patch0169: disk-storage-fix-allocation-size-for-pool-format-dos.patch Patch0170: qemu-qemuDomainPMSuspendAgent-Don-t-assign-to-ret-in.patch Patch0171: tests-avoid-close-of-bad-file-handle-in-commandtest.patch Patch0172: util-event-check-return-value-of-virInitialize.patch Patch0173: rpc-socket-properly-call-virSetCloseExec.patch Patch0174: virsh-do-not-return-bool-in-virshNetworkPortUUIDComp.patch Patch0175: logging-fix-endless-loop-on-EOF.patch Patch0176: vircommand.c-write-child-pidfile-before-process-tuni.patch Patch0177: virsocketaddr-Zero-netmask-in-virSocketAddrPrefixToN.patch Patch0178: logging-read-all-bytes-on-EOF-in-event-handler.patch Patch0179: libvirt-ensure-defresult-is-used-in-virConnectAuthCa.patch Patch0180: qemu-firmware-check-virJSONValueObjectGet-return-val.patch Patch0181: qemu-qemuDomainPMSuspendForDuration-Check-availabili.patch Patch0182: virNodeDevPCICapSRIOVVirtualParseXML-fix-memleak-of-.patch Patch0183: qemu-snapshot-Collect-query-named-block-nodes-prior-.patch Patch0184: virsh-completer-use-signed-variable-for-XPathNodeSet.patch Patch0185: virt-login-shell-correctly-calculate-string-length.patch Patch0186: qemu-avoid-maybe-uninitialized-warning-by-GCC-10.patch Patch0187: tools-avoid-potential-null-pointer-dereference-by-GC.patch Patch0188: storage-avoid-maybe-uninitialized-warning-by-GCC-10.patch Patch0189: virnuma-Don-t-work-around-numa_node_to_cpus-for-non-.patch Patch0190: virsh-guest-agent-timeout-set-default-value-for-opti.patch Patch0191: conf-properly-clear-out-autogenerated-macvtap-names-.patch Patch0192: storage_util-fix-qemu-img-sparse-allocation.patch Patch0193: vahDeinit-Fix-memory-leak.patch Patch0194: virnetdevbridge-Ignore-EEXIST-when-adding-an-entry-t.patch Patch0195: securityselinuxhelper-Fix-retval-of-setcon_raw-and-s.patch Patch0196: virCapabilitiesHostNUMAInitReal-Free-cpus-properly.patch Patch0197: vsh-fix-memory-leak-in-vshCommandParse.patch Patch0198: qemu_interface-Fix-cfg-refcounting-in-qemuInterfaceP.patch Patch0199: qemuBlockJobProcessEventCompletedPull-Avoid-dangling.patch Patch0200: qemuBlockJobProcessEventCompletedPull-Add-backingSto.patch Patch0201: nodedev-Signal-initCond-with-driver-locked.patch Patch0202: nodedev-Mark-device-initialization-complete-even-in-.patch Patch0203: cmdCheckpointList-Fix-memory-leak.patch Patch0204: cmdSnapshotList-Fix-memory-leak.patch Patch0205: virshCheckpointListCollect-Do-not-pass-NULL-to-qsort.patch Patch0206: qemu-blockjob-Transition-into-ready-state-only-from-.patch Patch0207: qemu-fix-crash-in-qemuDomainSetBlkioParameters-witho.patch Patch0208: domain_capabilities-Assert-enums-fit-into-unsigned-i.patch Patch0209: domain_conf.c-do-not-leak-video-in-virDomainDefParse.patch Patch0210: conf-Use-unsigned-long-long-for-timer-frequency.patch Patch0211: parthelper-Don-t-leak-canonical_path.patch Patch0212: parthelper-Initialize-error-object.patch Patch0213: qemu-fix-qemuMigrationSrcCleanup-to-use-qemuMigratio.patch Patch0214: util-Avoid-double-free-in-virProcessSetAffinity.patch Patch0215: util-fix-very-old-bug-typo-in-virNetDevParseVfInfo.patch Patch0216: domain_conf-fix-NULL-dereference-on-error-in-virDoma.patch Patch0217: testutils-call-va_end-before-return.patch Patch0218: qemu-Don-t-cache-domCaps-in-virQEMUDriverGetDomainCa.patch Patch0219: network-Introduce-mutex-for-bridge-name-generation.patch Patch0220: hostdev-Update-mdev-pointer-reference-after-checking.patch Patch0221: hostdev-mdev-Lookup-mdevs-by-sysfs-path-rather-than-.patch Patch0222: util-new-function-virSkipToDigit.patch Patch0223: util-Skip-over-any-extra-verbiage-preceding-version-.patch Patch0224: qemuMigrationSrcNBDStorageCopyReady-Use-ready-state-.patch Patch0225: qemuBlockJobEventProcess-Always-clear-mirrorState-wh.patch Patch0226: qemu-Fix-memstat-for-non-transitional-memballoon.patch Patch0227: virsh-Fix-XPATH-in-virshDomainDeviceAliasCompleter.patch Patch0228: virsh-domain-Fix-error-handling-of-pthread_sigmask.patch Patch0229: qemu_driver-increase-recorded-counter-for-disk-block.patch Patch0230: qemu_capabilities-Don-t-leak-str-in-virQEMUCapsLoadM.patch Patch0231: qemu_process-Release-domain-seclabel-later-in-qemuPr.patch Patch0232: nodedev-Don-t-crash-when-exiting-before-init-is-done.patch Patch0233: domain_cgroup.c-update-domain-after-setting-blkio.we.patch Patch0234: virCPUDefFindFeature-Make-first-argument-const-ptr.patch Patch0235: qemuOpenFileAs-Move-into-util-virqemu.c.patch Patch0236: Don-t-call-qsort-over-NULL.patch Patch0237: virFileReadLimFD-Cast-maxlen-to-size_t-before-adding.patch Patch0238: virnuma-Use-numa_nodes_ptr-when-checking-available-N.patch Patch0239: testutils-Don-t-leak-testBitmap-and-failedTests.patch Patch0240: tests-Don-t-leak-cpu-defs.patch Patch0241: virsh-snapshot-Don-t-leak-then-in-cmdSnapshotList.patch Patch0242: util-virIdentitySetCurrent-only-unref-the-old-identi.patch Patch0243: vireventglib-Remove-handles-with-the-highest-priorit.patch Patch0244: qemu-Do-not-pass-negative-ncpus-to-virCapabilitiesCl.patch Patch0245: qemu_agent-Rework-domain-object-locking-when-opening.patch Patch0246: util-virExec-may-blocked-by-reading-pipe-if-grandchi.patch Patch0247: util-fix-cache-invalidation-of-swtpm-capabilities.patch Patch0248: virnettlscontext-Drop-gnutls_dh_set_prime_bits.patch Patch0249: virnettlscontext-Don-t-pass-static-key-length-to-gnu.patch Patch0250: rpc-Fix-memory-leak-of-fds.patch Patch0251: migration-dirtyrate-Introduce-virDomainStartDirtyRat.patch Patch0252: migration-dirtyrate-Implement-qemuDomainStartDirtyRa.patch Patch0253: migration-dirtyrate-Introduce-domdirtyrate-calc-virs.patch Patch0254: migration-dirtyrate-Introduce-virDomainDirtyRateStat.patch Patch0255: migration-dirtyrate-Implement-qemuMonitorQueryDirtyR.patch Patch0256: migration-dirtyrate-Extend-dirtyrate-statistics-for-.patch Patch0257: migration-dirtyrate-Introduce-command-virsh-domstats.patch Patch0258: docs-Fix-template-matching-in-page.xsl.patch Patch0259: vircgroupv1-fix-null-string-specifier-argument-in-vi.patch Patch0260: qemu-fix-null-string-specifier-argument-in-qemuDomai.patch Patch0261: qemu-fix-domain-start-with-corrupted-save-file.patch Patch0262: qemu-fix-bad-indentation-for-qemuDomainNVRAMPathForm.patch Patch0263: util-fix-syslog-facility-value.patch Patch0264: util-set-facility-when-opening-syslog-channel.patch Patch0265: qemu-fix-memleak-in-qemuDomainAttachDeviceLive.patch Patch0266: mdev-Fix-daemon-crash-when-reattaching-mdevs-on-assi.patch Patch0267: Fix-allocation-of-virDomainFSDef.patch Patch0268: virsh-Fix-typo-of-metadata.patch Patch0269: virsh-cmdBlock-Remove-error-prefix-for-an-empty-line.patch Patch0270: vshtabletest-Fix-potential-memleak.patch Patch0271: vircgroupv2devices-fix-counting-entries-in-BPF-map.patch Patch0272: node_device_udev.h-Drop-unused-macro.patch Patch0273: qemu-fix-conversion-specifier-in-qemuBuildVsockDevPr.patch Patch0274: checkpoint-Fix-a-typo-of-comments.patch Patch0275: qemu_driver-Fix-indentation-in-qemuDomainGetStatsVcp.patch Patch0276: vmx-Require-networkName-for-bridged-and-custom-NICs.patch Patch0277: nodedev-wait-a-bit-longer-for-new-node-devices.patch Patch0278: bash-completion-fix-variable-leaks-of-word.patch Patch0279: util-Drop-pointless-NUL_TERMINATE-macro.patch Patch0280: virDomainCheckpointCreateXML-Don-t-use-HTML-in-funct.patch Patch0281: qemuMigrationSrcWaitForSpice-Remove-return-value.patch Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif # We had UML driver, but we've removed it. Obsoletes: libvirt-daemon-driver-uml <= 5.0.0 Obsoletes: libvirt-daemon-uml <= 5.0.0 %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-devel BuildRequires: libtool %endif BuildRequires: python3-docutils BuildRequires: gcc BuildRequires: perl-interpreter BuildRequires: python3 BuildRequires: systemd-units %if %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: glib2-devel >= 2.48 BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: readline-devel %if %{with_bash_completion} BuildRequires: bash-completion >= 2.0 %endif BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: libtasn1-devel BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas BuildRequires: systemd-devel >= 185 BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel >= 1.5.0 BuildRequires: libnl3-devel BuildRequires: libselinux-devel BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables BuildRequires: radvd BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel BuildRequires: polkit >= 0.112 # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %endif # For LVM drivers BuildRequires: lvm2 # For pool type=iscsi BuildRequires: iscsi-initiator-utils %if %{with_storage_iscsi_direct} # For pool type=iscsi-direct BuildRequires: libiscsi-devel %endif # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel # For XFS reflink clone support BuildRequires: xfsprogs-devel %if %{with_storage_rbd} BuildRequires: librados-devel BuildRequires: librbd-devel %endif %if %{with_storage_gluster} BuildRequires: libgfapi0 BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_storage_sheepdog} BuildRequires: sheepdog %endif %if %{with_storage_zfs} # Support any conforming implementation of zfs. On stock Fedora # this is zfs-fuse, but could be zfsonlinux upstream RPMs BuildRequires: /sbin/zfs BuildRequires: /sbin/zpool %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif BuildRequires: netcf-devel >= 0.2.2 %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Communication with the firewall and polkit daemons use DBus BuildRequires: dbus-devel # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel >= 2.4.0 %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.7.0 %endif BuildRequires: rpcgen BuildRequires: libtirpc-devel %if %{with_firewalld_zone} BuildRequires: firewalld-filesystem %endif %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: %{name}-libs = %{version}-%{release} # (client invokes 'nc' against the UNIX socket on the server) Requires: /usr/bin/nc # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip & /sbin/tc Requires: iproute # tc is provided by iproute-tc since at least Fedora 26 Requires: iproute-tc Requires: polkit >= 0.112 %ifarch %{ix86} x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif # For service management Requires(post): systemd-units Requires(post): systemd-sysv Requires(preun): systemd-units Requires(postun): systemd-units %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: radvd Requires: iptables %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iptables Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # needed for device enumeration Requires: systemd >= 185 %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: netcf-libs >= 0.2.2 %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcf library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif %if !%{with_storage_rbd} Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release} %endif %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %if %{with_storage_iscsi_direct} %package daemon-driver-storage-iscsi-direct Summary: Storage driver plugin for iscsi-direct Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: libiscsi %description daemon-driver-storage-iscsi-direct The storage driver backend adding implementation of the storage APIs for iscsi volumes using libiscsi direct connection. %endif %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: glusterfs-client >= 2.0.1 Requires: /usr/sbin/gluster %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_sheepdog} %package daemon-driver-storage-sheepdog Summary: Storage driver plugin for sheepdog Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: sheepdog %description daemon-driver-storage-sheepdog The storage driver backend adding implementation of the storage APIs for sheepdog volumes using. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_iscsi_direct} Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} %endif %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_sheepdog} Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz Requires: systemd-container %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: systemd-container %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-daemon-driver-xen < 4.3.0 %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Requires: libvirt-daemon = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: readline Requires: ncurses # Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package libs Summary: Client side libraries # So remote clients can access libvirt over SSH tunnel Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %package admin Summary: Set of tools to control libvirt daemon Requires: %{name}-libs = %{version}-%{release} Requires: readline %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description admin The client side utilities to control the libvirt daemon. %if %{with_bash_completion} %package bash-completion Summary: Bash completion script %description bash-completion Bash completion script stub. %endif %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark >= 2.4.0 Requires: %{name}-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: %{name}-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %prep %autosetup -p1 %build %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %define arg_login_shell --with-login-shell %else %define arg_lxc --without-lxc %define arg_login_shell --without-login-shell %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_storage_zfs} %define arg_storage_zfs --with-storage-zfs %else %define arg_storage_zfs --without-storage-zfs %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_fuse} %define arg_fuse --with-fuse %else %define arg_fuse --without-fuse %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_firewalld_zone} %define arg_firewalld_zone --with-firewalld-zone %else %define arg_firewalld_zone --without-firewalld-zone %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %if %{with_storage_iscsi_direct} %define arg_storage_iscsi_direct --with-storage-iscsi-direct %else %define arg_storage_iscsi_direct --without-storage-iscsi-direct %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager --with-packager="%{who}, %{when}, %{where}" %define arg_packager_version --with-packager-version="%{release}" %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux" # Nightly edk2.git-ovmf-x64 LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd" # Nightly edk2.git-ovmf-ia32 LOADERS="$LOADERS:/usr/share/edk2.git/ovmf-ia32/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-ia32/OVMF_VARS-pure-efi.fd" # Nightly edk2.git-aarch64 LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw" # Nightly edk2.git-arm LOADERS="$LOADERS:/usr/share/edk2.git/arm/QEMU_EFI-pflash.raw:/usr/share/edk2.git/arm/vars-template-pflash.raw" # Fedora edk2-ovmf LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd" # Fedora edk2-ovmf-ia32 LOADERS="$LOADERS:/usr/share/edk2/ovmf-ia32/OVMF_CODE.fd:/usr/share/edk2/ovmf-ia32/OVMF_VARS.fd" # Fedora edk2-aarch64 LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw" # Fedora edk2-arm LOADERS="$LOADERS:/usr/share/edk2/arm/QEMU_EFI-pflash.raw:/usr/share/edk2/arm/vars-template-pflash.raw" %define arg_loader_nvram --with-loader-nvram="$LOADERS" # place macros above and build commands below this comment export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) %if 0%{?enable_autotools} autoreconf -if %endif rm -f po/stamp-po %define _configure ../configure mkdir %{_vpath_builddir} cd %{_vpath_builddir} %configure --enable-dependency-tracking \ --with-runstatedir=%{_rundir} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-polkit \ --with-libvirtd \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-vz \ --without-bhyve \ --with-remote-default-mode=legacy \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ %{?arg_storage_iscsi_direct} \ --with-storage-scsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ --without-storage-vstorage \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ %{?arg_fuse} \ --with-netcf \ --with-selinux \ %{?arg_selinux_mount} \ --without-apparmor \ --without-hal \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ %{?arg_dtrace} \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_firewalld_zone} \ %{?arg_wireshark} \ --without-pm-utils \ --with-nss-plugin \ %{arg_packager} \ %{arg_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-tls-priority=%{tls_priority} \ %{?arg_loader_nvram} \ %{?enable_werror} \ --enable-expensive-tests \ --with-init-script=systemd \ %{?arg_login_shell} make %{?_smp_mflags} V=1 %install rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) cd %{_vpath_builddir} %make_install %{?_smp_mflags} SYSTEMD_UNIT_DIR=%{_unitdir} V=1 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a %if %{with_wireshark} rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la %endif install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml # libvirt saves this file with mode 0600 chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs %ifarch %{power64} s390x ia64 alpha sparc64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %endif %check cd %{_vpath_builddir} if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1 then cat tests/test-suite.log || true exit 1 fi %post libs /usr/sbin/ldconfig %postun libs /usr/sbin/ldconfig %pre daemon # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %systemd_post virtlockd.socket virtlockd-admin.socket %systemd_post virtlogd.socket virtlogd-admin.socket %systemd_post libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket %systemd_post libvirtd-tcp.socket libvirtd-tls.socket %systemd_post libvirtd.service # request daemon restart in posttrans mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %preun daemon %systemd_preun libvirtd.service %systemd_preun libvirtd-tcp.socket libvirtd-tls.socket %systemd_preun libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket %systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service %systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service %postun daemon /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || : /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || : fi # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket virtlogd-admin.socket || : fi %posttrans daemon if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then # See if user has previously modified their install to # tell libvirtd to use --listen grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1 if test $? = 0 then # Then lets keep honouring --listen and *not* use # systemd socket activation, because switching things # might confuse mgmt tool like puppet/ansible that # expect the old style libvirtd /bin/systemctl mask libvirtd.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-ro.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-admin.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-tls.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-tcp.socket >/dev/null 2>&1 || : else # Old libvirtd owns the sockets and will delete them on # shutdown. Can't use a try-restart as libvirtd will simply # own the sockets again when it comes back up. Thus we must # do this particular ordering, so that we get libvirtd # running with socket activation in use /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 if test $? = 0 then /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.socket >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd-ro.socket >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd-admin.socket >/dev/null 2>&1 || : /bin/systemctl start libvirtd.service >/dev/null 2>&1 || : fi fi fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %postun daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # libvirt saves this file with mode 0600 chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml # Make sure libvirt picks up the new network defininiton mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : fi %posttrans daemon-config-network if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-config-nwfilter cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 %{_sysconfdir}/libvirt/nwfilter/*.xml # Make sure libvirt picks up the new nwfilter defininitons mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %posttrans daemon-config-nwfilter if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %if %{with_qemu} %pre daemon-driver-qemu # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %endif %preun client %systemd_preun libvirt-guests.service %post client %systemd_post libvirt-guests.service %postun client %systemd_postun libvirt-guests.service %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS ChangeLog NEWS README README.md %doc %{_vpath_builddir}/libvirt-docs/* %files daemon %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %{_unitdir}/libvirtd.service %{_unitdir}/libvirtd.socket %{_unitdir}/libvirtd-ro.socket %{_unitdir}/libvirtd-admin.socket %{_unitdir}/libvirtd-tcp.socket %{_unitdir}/libvirtd-tls.socket %{_unitdir}/virtproxyd.service %{_unitdir}/virtproxyd.socket %{_unitdir}/virtproxyd-ro.socket %{_unitdir}/virtproxyd-admin.socket %{_unitdir}/virtproxyd-tcp.socket %{_unitdir}/virtproxyd-tls.socket %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlogd-admin.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %{_unitdir}/virtlockd-admin.socket %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_rundir}/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/virtproxyd.aug %{_datadir}/augeas/lenses/tests/test_virtproxyd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtproxyd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %{_mandir}/man7/virkey*.7* %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf %{_datadir}/augeas/lenses/virtinterfaced.aug %{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug %{_unitdir}/virtinterfaced.service %{_unitdir}/virtinterfaced.socket %{_unitdir}/virtinterfaced-ro.socket %{_unitdir}/virtinterfaced-admin.socket %attr(0755, root, root) %{_sbindir}/virtinterfaced %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf %{_datadir}/augeas/lenses/virtnetworkd.aug %{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug %{_unitdir}/virtnetworkd.service %{_unitdir}/virtnetworkd.socket %{_unitdir}/virtnetworkd-ro.socket %{_unitdir}/virtnetworkd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnetworkd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_rundir}/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %endif %files daemon-driver-nodedev %config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf %{_datadir}/augeas/lenses/virtnodedevd.aug %{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug %{_unitdir}/virtnodedevd.service %{_unitdir}/virtnodedevd.socket %{_unitdir}/virtnodedevd-ro.socket %{_unitdir}/virtnodedevd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnodedevd %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf %{_datadir}/augeas/lenses/virtnwfilterd.aug %{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug %{_unitdir}/virtnwfilterd.service %{_unitdir}/virtnwfilterd.socket %{_unitdir}/virtnwfilterd-ro.socket %{_unitdir}/virtnwfilterd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnwfilterd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_rundir}/libvirt/network/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf %{_datadir}/augeas/lenses/virtsecretd.aug %{_datadir}/augeas/lenses/tests/test_virtsecretd.aug %{_unitdir}/virtsecretd.service %{_unitdir}/virtsecretd.socket %{_unitdir}/virtsecretd-ro.socket %{_unitdir}/virtsecretd-admin.socket %attr(0755, root, root) %{_sbindir}/virtsecretd %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %files daemon-driver-storage-core %config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf %{_datadir}/augeas/lenses/virtstoraged.aug %{_datadir}/augeas/lenses/tests/test_virtstoraged.aug %{_unitdir}/virtstoraged.service %{_unitdir}/virtstoraged.socket %{_unitdir}/virtstoraged-ro.socket %{_unitdir}/virtstoraged-admin.socket %attr(0755, root, root) %{_sbindir}/virtstoraged %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so %files daemon-driver-storage-disk %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so %if %{with_storage_iscsi_direct} %files daemon-driver-storage-iscsi-direct %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so %endif %files daemon-driver-storage-mpath %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_sheepdog} %files daemon-driver-storage-sheepdog %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf %{_datadir}/augeas/lenses/virtqemud.aug %{_datadir}/augeas/lenses/tests/test_virtqemud.aug %{_unitdir}/virtqemud.service %{_unitdir}/virtqemud.socket %{_unitdir}/virtqemud-ro.socket %{_unitdir}/virtqemud-admin.socket %attr(0755, root, root) %{_sbindir}/virtqemud %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %{_rundir}/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ %dir %attr(0711, root, root) %{_localstatedir}/log/swtpm/libvirt/qemu/ %{_bindir}/virt-qemu-run %{_mandir}/man1/virt-qemu-run.1* %endif %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf %{_datadir}/augeas/lenses/virtlxcd.aug %{_datadir}/augeas/lenses/tests/test_virtlxcd.aug %{_unitdir}/virtlxcd.service %{_unitdir}/virtlxcd.socket %{_unitdir}/virtlxcd-ro.socket %{_unitdir}/virtlxcd-admin.socket %attr(0755, root, root) %{_sbindir}/virtlxcd %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_rundir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf %{_datadir}/augeas/lenses/virtxend.aug %{_datadir}/augeas/lenses/tests/test_virtxend.aug %{_unitdir}/virtxend.service %{_unitdir}/virtxend.socket %{_unitdir}/virtxend-ro.socket %{_unitdir}/virtxend-admin.socket %attr(0755, root, root) %{_sbindir}/virtxend %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_rundir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf %{_datadir}/augeas/lenses/virtvboxd.aug %{_datadir}/augeas/lenses/tests/test_virtvboxd.aug %{_unitdir}/virtvboxd.service %{_unitdir}/virtvboxd.socket %{_unitdir}/virtvboxd-ro.socket %{_unitdir}/virtvboxd-admin.socket %attr(0755, root, root) %{_sbindir}/virtvboxd %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man1/virt-host-validate.1* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %ifnarch aarch64 x86_64 %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %endif %endif %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virsh %endif %{_unitdir}/libvirt-guests.service %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %files libs -f %{_vpath_builddir}/%{name}.lang %license COPYING COPYING.LESSER %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/cputypes.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domainbackup.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincheckpoint.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/networkport.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/nwfilter_params.rng %{_datadir}/libvirt/schemas/nwfilterbinding.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagepoolcaps.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map/*.xml %{_datadir}/libvirt/test-screenshot.png %files admin %{_mandir}/man1/virt-admin.1* %{_bindir}/virt-admin %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virt-admin %endif %if %{with_bash_completion} %files bash-completion %{_datadir}/bash-completion/completions/vsh %endif %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %{_libexecdir}/virt-login-shell-helper %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-checkpoint.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml %changelog * Fri Nov 25 2022 yezengruan - 6.2.0-46 - sync some bugfix patches from upstream * Fri Nov 11 2022 yezengruan - 6.2.0-45 - docs: Fix template matching in page.xsl * Thu Nov 03 2022 yezengruan - 6.2.0-44 - libvirt: support migration dirtyrate * Tue Oct 11 2022 wengyu - 6.2.0-43 - libvirt: Synchronize upstream patches according to issue I5OLYY * Thu Aug 25 2022 yezengruan - 6.2.0-42 - qemu: Add missing lock in qemuProcessHandleMonitorEOF (CVE-2021-3975) * Thu Aug 11 2022 yezengruan - 6.2.0-41 - apibuild: Fix self.waring method call * Mon Jun 20 2022 yezengruan - 6.2.0-40 - nwfilter: fix crash when counting number of network filters (CVE-2022-0897) * Mon Jun 13 2022 yezengruan - 6.2.0-39 - sw_64: Add sw64 architecture support - src: workaround warning triggered in glib 2.69 * Tue May 10 2022 yezengruan - 6.2.0-38 - update some inconsistent patches - virsh: Display vhostuser socket path in domblklist * Wed Apr 27 2022 yezengruan - 6.2.0-37 - update the format of changelog * Thu Mar 24 2022 yezengruan - 6.2.0-36 - apparmor: Permit new capabilities required by libvirtd * Thu Mar 24 2022 yezengruan - 6.2.0-35 - qemuMonitorJSONSetMigrationParams: Take double pointer for @params - qemuMonitorJSONAddObject: Take double pointer for @props - :qemuMonitorJSONMakeCommandInternal: Clear @arguments when stolen - qemuMonitorAddObject: Fix semantics of @alias - qemuMonitorAddObject: Refactor cleanup - util: json: Replace virJSONValueObjectSteal by virJSONValueObjectRemoveKey - qemu: command: Generate commandline of 'masterKey0' secret via JSON - qemu: command: Generate commandline of 'sev0' sev-guest object via JSON - qemu: command: Generate commandline of iothread objects JSON - qemu: capabilities: Introduce QEMU_CAPS_OBJECT_QAPIFIED - qemu: monitor: Make wrapping of 'props' of 'object-add' optional - qemuMonitorCreateObjectPropsWrap: Open-code in qemuBuildMemoryBackendProps - qemu: monitor: Don't add 'props' wrapper if qemu has QEMU_CAPS_OBJECT_QAPIFIED - qemu: command: Use JSON for QAPIfied -object directly - tests: qemuxml2argv: Validate generation of JSON props for object-add - qemu: capabilities: Enable detection of QEMU_CAPS_OBJECT_QAPIFIED * Sat Mar 12 2022 yezengruan - 6.2.0-34 - Revert libvirt: support aarch64 vtpm with parameter tpm-tis-device - qemu: Fix swtpm device with aarch64 - qemu: Fix libvirt hang due to early TPM device stop - qemu_tpm: Move logfile path generation into a separate function - qemu_tpm: Generate log file path among with storage path - virtpm: Fix @path handling in virTPMEmulatorInit() * Fri Mar 11 2022 yezengruan - 6.2.0-33 - qemu: Probe for a few params supported by migrate-set-parameters - qemu: Avoid deprecated migrate_set_speed QMP command - qemu: Avoid deprecated migrate_set_downtime QMP command - qemu: Avoid deprecated query-migrate-cache-size QMP command - qemu: Avoid deprecated migrate-set-cache-size QMP command - qemu: Track numa-mem-supported machine attribute - qemuBuildNumaArgStr: Switch order of if() and for() - qemuBuildNumaArgStr: Use modern -numa memdev= if old -numa mem= is unsupported * Mon Feb 21 2022 imxcc - 6.2.0-32 - virQEMUBuildCommandLineJSON: Allow skipping certain keys - virQEMUBuildCommandLineJSON: Add possibility for using 'on/off' instead of 'yes/no' - util: virqemu: Introduce virQEMUBuildNetdevCommandlineFromJSON - util: json: Introduce virJSONValueObjectAppendStringPrintf - qemuBuildChannelsCommandLine: Use typecasted switch for channel type - qemuBuildChannelsCommandLine: Extract common formatting of 'chardev' - qemuBuildChannelChrDeviceStr: Remove formatting of properties for -netdev - qemuMonitorJSON(Add|Remove)Netdev: Refactor cleanup - qemuBuildHostNetStr: Stop using 'ipv6-net' convenience argument - qemu: command: Generate -netdev command line via JSON->cmdline conversion - qemuBuildChannelGuestfwdNetdevProps: Convert to generating JSON props - qemuMonitorAddNetdev: Convert to the native JSON props object - virCommand: Introduce virCommandGetArgList - testutilsqemuschema: Introduce testQEMUSchemaValidateCommand - testCompareXMLToArgv: Split out preparation and command formatting - virQEMUBuildNetdevCommandlineFromJSON: Prepare for quirky 'guestfwd' - qemu: Prepare for testing of 'netdev_add' props via qemuxml2argvtest - qemuxml2argvtest: Add QAPI/QMP schema validation for -blockdev and -netdev * Sat Feb 12 2022 imxcc - 6.2.0-31 - hotpatch: virsh support autoload mode * Sat Jan 29 2022 imxcc - 6.2.0-30 - Revert "tests: disabale storage tests" * Fri Jan 14 2022 imxcc - 6.2.0-29 - tests: disabale storage tests * Tue Jan 11 2022 imxcc - 6.2.0-28 - docs: build: Don't include stylesheet in intermediate html - tests: Replace deprecated ASN1 code * Mon Dec 06 2021 Euler Robot - 6.2.0-27 - hotpatch: implement hotpatch virsh api - hotpatch: check vm id and pid before using hotpatch api - domain: add logs for virDomainHotpatchManage * Mon Dec 06 2021 Euler Robot - 6.2.0-26 - Hotpatch: introduce DomainHotpatchManage API - hotpatch: Implement qemuDomainHotpatchManage - hotpatch: introduce hotpatch async job flag * Sun Sep 26 2021 imxcc - 6.2.0-26 - fix cve-2021-3667 cve-2021-3631 * Fri Sep 24 2021 Euler Robot - 6.2.0-25 - conf/domain_conf: pin the retry_interval and retry_timeout parameters to xml * Tue Sep 14 2021 imxcc - 6.2.0-24 - virDevMapperGetTargets: Don't ignore EBADF * Tue Sep 14 2021 imxcc - 6.2.0-23 - Modify some different patch files * Thu Sep 2 2021 heyitao - 6.2.0-22 - Don't cache device-mapper major - Handle kernel without device-mapper support * Fri Jul 30 2021 chenyanpanHW - 6.2.0-21 - DESC: delete -S git_am from %autosetup, and delete BuildRequires git * Tue Jul 27 2021 Jingyi Wang - 6.2.0-20 - add new CPU model Cooperlake * Tue Jul 13 2021 imxcc - 6.2.0-19 - tests: fix stat mocking with Fedora rawhide * Fri Mar 19 2021 Jiajie Li - 6.2.0-18 - libvirt.spec: remove dtrace for aarch64 OS * Thu Mar 18 2021 Chen Qun - 6.2.0-17 - libvirt/conf: Set default values of retry fileds * Sat Feb 27 2021 Huawei Technologies Co., Ltd - 6.2.0-16 - add phytium 2000plus and s2500 support on arm architecture for capability * Sat Feb 27 2021 Huawei Technologies Co., Ltd - 6.2.0-15 - libvirt: Add 'retry' support for error policy - qemu: Support 'retry' BLOCK_IO_ERROR event. * Wed Jan 20 2021 Huawei Technologies Co., Ltd - 6.2.0-15 - util: Move virIsDevMapperDevice() to virdevmapper.c - virdevmapper: Don't use libdevmapper to obtain dependencies * Wed Oct 14 2020 Huawei Technologies Co., Ltd - 6.2.0-14 - rpc: gendispatch: handle empty flags - rpc: add support for filtering @acls by uint params - rpc: require write acl for guest agent in virDomainInterfaceAddresses - qemu: agent: set ifname to NULL after freeing * Tue Sep 22 2020 AlexChen - 6.2.0-13 - bugfix: cherry-pick some bugfix patches from opensource community * Tue Sep 22 2020 Hao Wang - 6.2.0-12 - backport upstream patches * Tue Sep 22 2020 Zeyu Jin - 6.2.0-11 - bugfix: backport an upstream patch to fix '/run/libvirt/qemu/dbus' racing bug. * Tue Sep 22 2020 Jin Yan - 6.2.0-10 - bugfix: cherry-pick some bugfix patches from opensource community * Wed Aug 5 2020 AlexChen - 6.2.0-9 - tests: skip the test4 if the testcase is run in the container env * Wed Aug 5 2020 Jiang Fangjie - 6.2.0-8 - Libvirt supports aarch64 vtpm with parameter tpm-tis-device * Tue Aug 4 2020 Xu Yandong - 6.2.0-7 - Substitute security_context_t with char pointer. * Tue May 26 2020 Xu Yandong - 6.2.0-6 - Introduce Kunpeng-920 cpu features. * Wed May 20 2020 Xu Yandong - 6.2.0-5 - Enable 'host-model' cpu mode. * Mon May 11 2020 Xu Yandong - 6.2.0-4 - Fix virdaemon waiting for child processes return code error. - Fix virsh dump and migrate return code error. * Mon May 11 2020 Xu Yandong - 6.2.0-3 - Checkout cpu capabilities support for ARM architecture. - Support Kunpeng-920 CPU. * Mon Apr 20 2020 Xu Yandong - 6.2.0-2 - Checkout bugfixs from 5.5.0 release. * Tue Apr 14 2020 Xu Yandong - 6.2.0-1 - Rebase to version 6.2.0. * Fri Jul 19 2019 openEuler Buildteam - 5.5.0-1 - Update to 5.5.0 release, Initial package for openEuler.