Package init
This commit is contained in:
overweight
commit
15927383b9
BIN
ipset-7.3.tar.bz2
Normal file
BIN
ipset-7.3.tar.bz2
Normal file
Binary file not shown.
18
ipset.service
Normal file
18
ipset.service
Normal file
@ -0,0 +1,18 @@
|
|||||||
|
[Unit]
|
||||||
|
Description=IP sets for iptables
|
||||||
|
Before=iptables.service
|
||||||
|
Before=ip6tables.service
|
||||||
|
|
||||||
|
[Service]
|
||||||
|
Type=oneshot
|
||||||
|
RemainAfterExit=yes
|
||||||
|
ExecStart=/usr/libexec/ipset/ipset.start-stop start
|
||||||
|
ExecStop=/usr/libexec/ipset/ipset.start-stop stop
|
||||||
|
ExecReload=/usr/libexec/ipset/ipset.start-stop reload
|
||||||
|
# Save current ipset entries on stop/restart.
|
||||||
|
# Value: yes|no, default: no
|
||||||
|
# Saves all ipsets to /etc/ipset/ipset if ipset gets stopped
|
||||||
|
Environment=IPSET_SAVE_ON_STOP=no IPSET_SAVE_ON_RESTART=no
|
||||||
|
|
||||||
|
[Install]
|
||||||
|
WantedBy=basic.target
|
||||||
117
ipset.spec
Normal file
117
ipset.spec
Normal file
@ -0,0 +1,117 @@
|
|||||||
|
Name: ipset
|
||||||
|
Version: 7.3
|
||||||
|
Release: 1
|
||||||
|
Summary: Manage Linux IP sets
|
||||||
|
License: GPLv2
|
||||||
|
URL: https://ipset.netfilter.org/
|
||||||
|
Source0: https://ipset.netfilter.org/%{name}-%{version}.tar.bz2
|
||||||
|
Source1: ipset.service
|
||||||
|
Source2: ipset.start-stop
|
||||||
|
|
||||||
|
BuildRequires: libmnl-devel automake autoconf libtool libtool-ltdl-devel systemd
|
||||||
|
Requires: ipset-libs = %{version}-%{release} iptables-services
|
||||||
|
Requires(post): systemd
|
||||||
|
Requires(preun): systemd
|
||||||
|
Requires(postun): systemd
|
||||||
|
|
||||||
|
|
||||||
|
Provides: ipset-service
|
||||||
|
Obsoletes: ipset-service
|
||||||
|
|
||||||
|
%description
|
||||||
|
IP sets are a framework inside the Linux kernel, which can be administered
|
||||||
|
by the ipset utility. Depending on the type, an IP set may store IP
|
||||||
|
addresses, networks, (TCP/UDP) port numbers, MAC addresses, interface names
|
||||||
|
or combinations of them in a way, which ensures lightning speed when
|
||||||
|
matching an entry against a set.
|
||||||
|
|
||||||
|
If you want to
|
||||||
|
* store multiple IP addresses or port numbers and match against the
|
||||||
|
collection by iptables at one swoop;
|
||||||
|
* dynamically update iptables rules against IP addresses or ports without
|
||||||
|
performance penalty;
|
||||||
|
* express complex IP address and ports based rulesets with one single
|
||||||
|
iptables rule and benefit from the speed of IP sets
|
||||||
|
then ipset may be the proper tool for you.
|
||||||
|
|
||||||
|
%package libs
|
||||||
|
Summary: library files for ipset
|
||||||
|
|
||||||
|
%description libs
|
||||||
|
library files for ipset
|
||||||
|
|
||||||
|
%package devel
|
||||||
|
Summary: Header files for ipset
|
||||||
|
Requires: ipset-libs = %{version}-%{release} kernel-headers
|
||||||
|
|
||||||
|
%description devel
|
||||||
|
Header files for ipset
|
||||||
|
|
||||||
|
%package_help
|
||||||
|
|
||||||
|
%prep
|
||||||
|
%autosetup -n %{name}-%{version} -p1
|
||||||
|
|
||||||
|
%build
|
||||||
|
./autogen.sh
|
||||||
|
%configure --with-kmod=no
|
||||||
|
rm -fr kernel
|
||||||
|
%disable_rpath
|
||||||
|
%make_build
|
||||||
|
|
||||||
|
%install
|
||||||
|
%make_install
|
||||||
|
%delete_la
|
||||||
|
|
||||||
|
install -d -m 755 %{buildroot}/%{_unitdir}
|
||||||
|
install -c -m 644 %{SOURCE1} %{buildroot}/%{_unitdir}
|
||||||
|
|
||||||
|
install -d -m 755 %{buildroot}%{_libexecdir}/%{name}
|
||||||
|
install -c -m 755 %{SOURCE2} %{buildroot}%{_libexecdir}/%{name}
|
||||||
|
|
||||||
|
install -d -m 755 %{buildroot}%{_sysconfdir}/%{name}
|
||||||
|
|
||||||
|
%ldconfig_scriptlets libs
|
||||||
|
|
||||||
|
%post
|
||||||
|
%systemd_post %{name}.service
|
||||||
|
|
||||||
|
%preun
|
||||||
|
if [[ $1 -eq 0 && -n $(lsmod | grep "^xt_set ") ]]; then
|
||||||
|
rmmod xt_set 2>/dev/null
|
||||||
|
[[ $? -ne 0 ]] && echo Current iptables configuration requires ipsets && exit 1
|
||||||
|
fi
|
||||||
|
%systemd_preun %{name}.service
|
||||||
|
|
||||||
|
%postun
|
||||||
|
%systemd_postun_with_restart %{name}.service
|
||||||
|
|
||||||
|
%files
|
||||||
|
%defattr(-,root,root)
|
||||||
|
%license COPYING
|
||||||
|
%doc ChangeLog
|
||||||
|
%{_sbindir}/ipset
|
||||||
|
%{_unitdir}/ipset.service
|
||||||
|
%{_libexecdir}/ipset/ipset.start-stop
|
||||||
|
%{_sysconfdir}/%{name}
|
||||||
|
|
||||||
|
%files libs
|
||||||
|
%defattr(-,root,root)
|
||||||
|
%license COPYING
|
||||||
|
%{_libdir}/libipset.so.13*
|
||||||
|
|
||||||
|
%files devel
|
||||||
|
%defattr(-,root,root)
|
||||||
|
%{_includedir}/libipset
|
||||||
|
%{_libdir}/*.a
|
||||||
|
%{_libdir}/libipset.so
|
||||||
|
%{_libdir}/pkgconfig/*.pc
|
||||||
|
|
||||||
|
%files help
|
||||||
|
%defattr(-,root,root)
|
||||||
|
%{_mandir}/man8/%{name}.8.*
|
||||||
|
%{_mandir}/man3/libipset.3.*
|
||||||
|
|
||||||
|
%changelog
|
||||||
|
* Wed Sep 11 2019 openEuler Buildteam <buildteam@openeuler.org> - 7.3-1
|
||||||
|
- Package init
|
||||||
209
ipset.start-stop
Normal file
209
ipset.start-stop
Normal file
@ -0,0 +1,209 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
#
|
||||||
|
# ipset Start and stop ipset firewall sets
|
||||||
|
#
|
||||||
|
# config: /etc/ipset/ipset
|
||||||
|
#
|
||||||
|
|
||||||
|
IPSET=ipset
|
||||||
|
IPSET_BIN=/usr/sbin/${IPSET}
|
||||||
|
IPSET_DATA=/etc/${IPSET}/${IPSET}
|
||||||
|
|
||||||
|
IPTABLES_CONFIG=/etc/sysconfig/iptables-config
|
||||||
|
IP6TABLES_CONFIG=${IPTABLES_CONFIG/iptables/ip6tables}
|
||||||
|
|
||||||
|
TMP_FIFO=/tmp/${IPSET}.$$
|
||||||
|
|
||||||
|
if [[ ! -x ${IPSET_BIN} ]]; then
|
||||||
|
echo "${IPSET_BIN} does not exist."
|
||||||
|
exit 5
|
||||||
|
fi
|
||||||
|
|
||||||
|
CLEAN_FILES=TMP_FIFO
|
||||||
|
trap "rm -f \$CLEAN_FILES" EXIT
|
||||||
|
|
||||||
|
# Default ipset configuration:
|
||||||
|
[[ -z $IPSET_SAVE_ON_STOP ]] && IPSET_SAVE_ON_STOP=no # Overridden by ip(6)tables IP(6)TABLES_SAVE_ON_STOP
|
||||||
|
[[ -z $IPSET_SAVE_ON_RESTART ]] && IPSET_SAVE_ON_RESTART=no # Overridden by ip(6)tables IP(6)TABLES_SAVE_ON_RESTART
|
||||||
|
|
||||||
|
# Load iptables configuration(s)
|
||||||
|
[[ -f "$IPTABLES_CONFIG" ]] && . "$IPTABLES_CONFIG"
|
||||||
|
[[ -f "$IP6TABLES_CONFIG" ]] && . "$IP6TABLES_CONFIG"
|
||||||
|
|
||||||
|
# It doesn't make sense to save iptables config and not our config
|
||||||
|
[[ ${IPTABLES_SAVE_ON_STOP} = yes || ${IP6TABLES_SAVE_ON_STOP} = yes ]] && IPSET_SAVE_ON_STOP=yes
|
||||||
|
[[ ${IPTABLES_SAVE_ON_RESTART} = yes || ${IP6TABLES_SAVE_ON_RESTART} = yes ]] && IPSET_SAVE_ON_RESTART=yes
|
||||||
|
|
||||||
|
check_can_unload() {
|
||||||
|
# If the xt_set module is loaded and can't be unloaded, then iptables is
|
||||||
|
# using ipsets, so refuse to stop the service.
|
||||||
|
if [[ -n $(lsmod | grep "^xt_set ") ]]; then
|
||||||
|
rmmod xt_set 2>/dev/null
|
||||||
|
[[ $? -ne 0 ]] && echo Current iptables configuration requires ipsets && return 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
return 0
|
||||||
|
}
|
||||||
|
|
||||||
|
flush_n_delete() {
|
||||||
|
local ret=0 set
|
||||||
|
|
||||||
|
# Flush sets
|
||||||
|
${IPSET_BIN} flush
|
||||||
|
let ret+=$?
|
||||||
|
|
||||||
|
# Delete ipset sets. If we don't do them individually, then none
|
||||||
|
# will be deleted unless they all can be.
|
||||||
|
for set in $(${IPSET_BIN} list -name); do
|
||||||
|
${IPSET_BIN} destroy 2>/dev/null
|
||||||
|
[[ $? -ne 0 ]] && ret=1
|
||||||
|
done
|
||||||
|
|
||||||
|
return $ret
|
||||||
|
}
|
||||||
|
|
||||||
|
start_clean()
|
||||||
|
{
|
||||||
|
mkfifo -m go= "${TMP_FIFO}"
|
||||||
|
[[ $? -ne 0 ]] && return 1
|
||||||
|
|
||||||
|
# Get the lists of sets in current(old) config and new config
|
||||||
|
old_sets="$(${IPSET_BIN} list -name | sort -u)"
|
||||||
|
new_sets="$(grep ^create "${IPSET_DATA}" | cut -d " " -f 2 | sort -u)"
|
||||||
|
|
||||||
|
# List of sets no longer wanted
|
||||||
|
drop_sets="$( printf "%s\n" "${old_sets}" > "${TMP_FIFO}" &
|
||||||
|
printf "%s\n" "${new_sets}" | comm -23 "${TMP_FIFO}" -
|
||||||
|
)"
|
||||||
|
|
||||||
|
# Get rid of sets no longer needed
|
||||||
|
# Unfortunately -! doesn't work for destroy, so we have to do it a command at a time
|
||||||
|
for dset in $drop_sets; do
|
||||||
|
ipset destroy $dset 2>/dev/null
|
||||||
|
# If it won't go - ? in use by iptables, just clear it
|
||||||
|
[[ $? -ne 0 ]] && ipset flush $dset
|
||||||
|
done
|
||||||
|
|
||||||
|
# Now delete the set members no longer required
|
||||||
|
${IPSET_BIN} save | grep "^add " | sort >${TMP_FIFO} &
|
||||||
|
grep "^add " ${IPSET_DATA} | sort | comm -23 ${TMP_FIFO} - | sed -e "s/^add /del /" \
|
||||||
|
| ${IPSET_BIN} restore -!
|
||||||
|
|
||||||
|
# At last we can add the set members we haven't got
|
||||||
|
ipset restore -! <${IPSET_DATA}
|
||||||
|
|
||||||
|
rm ${TMP_FIFO}
|
||||||
|
|
||||||
|
return 0
|
||||||
|
}
|
||||||
|
|
||||||
|
start() {
|
||||||
|
# Do not start if there is no config file.
|
||||||
|
[[ ! -f "$IPSET_DATA" ]] && echo "Loaded with no configuration" && return 0
|
||||||
|
|
||||||
|
# We can skip the first bit and do a simple load if
|
||||||
|
# there is no current ipset configuration
|
||||||
|
res=1
|
||||||
|
if [[ -n $(${IPSET_BIN} list -name) ]]; then
|
||||||
|
# The following may fail for some bizarre reason
|
||||||
|
start_clean
|
||||||
|
res=$?
|
||||||
|
|
||||||
|
[[ $res -ne 0 ]] && echo "Some old configuration may remain"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# res -ne 0 => either start_clean failed, or we didn't need to run it
|
||||||
|
if [[ $res -ne 0 ]]; then
|
||||||
|
# This is the easy way to start but would leave any old
|
||||||
|
# entries still configured. Still, better than nothing -
|
||||||
|
# but fine if we had no config
|
||||||
|
${IPSET_BIN} restore -! <${IPSET_DATA}
|
||||||
|
res=$?
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [[ $res -ne 0 ]]; then
|
||||||
|
return 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
return 0
|
||||||
|
}
|
||||||
|
|
||||||
|
stop() {
|
||||||
|
# Nothing to stop if ip_set module is not loaded.
|
||||||
|
lsmod | grep -q "^ip_set "
|
||||||
|
[[ $? -ne 0 ]] && return 6
|
||||||
|
|
||||||
|
flush_n_delete
|
||||||
|
[[ $? -ne 0 ]] && echo Warning: Not all sets were flushed/deleted
|
||||||
|
|
||||||
|
return 0
|
||||||
|
}
|
||||||
|
|
||||||
|
save() {
|
||||||
|
# Do not save if ip_set module is not loaded.
|
||||||
|
lsmod | grep -q "^ip_set "
|
||||||
|
[[ $? -ne 0 ]] && return 6
|
||||||
|
|
||||||
|
[[ -z $(${IPSET_BIN} list -name) ]] && return 0
|
||||||
|
|
||||||
|
ret=0
|
||||||
|
TMP_FILE=$(/bin/mktemp -q /tmp/$IPSET.XXXXXX) \
|
||||||
|
&& CLEAN_FILES+=" $TMP_FILE" \
|
||||||
|
&& chmod 600 "$TMP_FILE" \
|
||||||
|
&& ${IPSET_BIN} save > $TMP_FILE 2>/dev/null \
|
||||||
|
&& [[ -s $TMP_FILE ]] \
|
||||||
|
|| ret=1
|
||||||
|
|
||||||
|
if [[ $ret -eq 0 ]]; then
|
||||||
|
# No need to do anything if the files are the same
|
||||||
|
if [[ ! -f $IPSET_DATA ]]; then
|
||||||
|
mv $TMP_FILE $IPSET_DATA && chmod 600 $IPSET_DATA || ret=1
|
||||||
|
else
|
||||||
|
diff -q $TMP_FILE $IPSET_DATA >/dev/null
|
||||||
|
|
||||||
|
if [[ $? -ne 0 ]]; then
|
||||||
|
if [[ -f $IPSET_DATA ]]; then
|
||||||
|
cp -f --preserve=timestamps $IPSET_DATA $IPSET_DATA.save \
|
||||||
|
&& chmod 600 $IPSET_DATA.save \
|
||||||
|
|| ret=1
|
||||||
|
fi
|
||||||
|
if [[ $ret -eq 0 ]]; then
|
||||||
|
cp -f --preserve=timestamps $TMP_FILE $IPSET_DATA \
|
||||||
|
&& chmod 600 $IPSET_DATA \
|
||||||
|
|| ret=1
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
rm -f $TMP_FILE
|
||||||
|
return $ret
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
case "$1" in
|
||||||
|
start)
|
||||||
|
start
|
||||||
|
RETVAL=$?
|
||||||
|
;;
|
||||||
|
stop)
|
||||||
|
check_can_unload || exit 1
|
||||||
|
[[ $IPSET_SAVE_ON_STOP = yes ]] && save
|
||||||
|
stop
|
||||||
|
RETVAL=$?
|
||||||
|
[[ $RETVAL -eq 6 ]] && echo "${IPSET}: not running" && exit 0
|
||||||
|
;;
|
||||||
|
reload)
|
||||||
|
[[ $IPSET_SAVE_ON_RESTART = yes ]] && save
|
||||||
|
stop
|
||||||
|
RETVAL=$?
|
||||||
|
[[ $RETVAL -eq 6 ]] && echo "${IPSET}: not running" && exit 0
|
||||||
|
start
|
||||||
|
RETVAL=$?
|
||||||
|
;;
|
||||||
|
*)
|
||||||
|
echo "Usage: $IPSET {start|stop|reload}" >&2
|
||||||
|
exit 1
|
||||||
|
esac
|
||||||
|
|
||||||
|
exit $RETVAL
|
||||||
Loading…
x
Reference in New Issue
Block a user