flatpak/backport-0001-CVE-2021-41133.patch

From e26ac7586c392b5eb35ff4609fe232c52523b2cf Mon Sep 17 00:00:00 2001
From: Simon McVittie <smcv@collabora.com>
Date: Wed, 1 Sep 2021 11:53:23 +0100
Subject: [PATCH] run: Add an errno value to seccomp filters

At the moment, if we block a syscall we always make it fail with EPERM,
but this is risky: user-space libraries can start to use new replacements
for old syscalls at any time, and will often treat EPERM as a fatal error.
For new syscalls, we should make the syscall fail with ENOSYS, which is
indistinguishable from running on an older kernel and will cause fallback
to an older implementation, for example clone3() to clone().

In future we should probably move from EPERM to ENOSYS for some of the
syscalls we already block, but for now keep the status quo.

This is a prerequisite for fixing the vulnerability tracked as
GHSA-67h7-w3jq-vh4q.

Signed-off-by: Simon McVittie <smcv@collabora.com>

Conflict:NA   
Reference:https://github.com/flatpak/flatpak/commit/e26ac7586c392b5eb35ff4609fe232c52523b2cf

---
 common/flatpak-run.c | 62 +++++++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 26 deletions(-)

diff --git a/common/flatpak-run.c b/common/flatpak-run.c
index f48f402..3931820 100644
--- a/common/flatpak-run.c
+++ b/common/flatpak-run.c
@@ -2784,61 +2784,63 @@ setup_seccomp (FlatpakBwrap   *bwrap,
   struct
   {
     int                  scall;
+    int                  errnum;
     struct scmp_arg_cmp *arg;
   } syscall_blocklist[] = {
     /* Block dmesg */
-    {SCMP_SYS (syslog)},
+    {SCMP_SYS (syslog), EPERM},
     /* Useless old syscall */
-    {SCMP_SYS (uselib)},
+    {SCMP_SYS (uselib), EPERM},
     /* Don't allow disabling accounting */
-    {SCMP_SYS (acct)},
+    {SCMP_SYS (acct), EPERM},
     /* 16-bit code is unnecessary in the sandbox, and modify_ldt is a
        historic source of interesting information leaks. */
-    {SCMP_SYS (modify_ldt)},
+    {SCMP_SYS (modify_ldt), EPERM},
     /* Don't allow reading current quota use */
-    {SCMP_SYS (quotactl)},
+    {SCMP_SYS (quotactl), EPERM},
 
     /* Don't allow access to the kernel keyring */
-    {SCMP_SYS (add_key)},
-    {SCMP_SYS (keyctl)},
-    {SCMP_SYS (request_key)},
+    {SCMP_SYS (add_key), EPERM},
+    {SCMP_SYS (keyctl), EPERM},
+    {SCMP_SYS (request_key), EPERM},
 
     /* Scary VM/NUMA ops */
-    {SCMP_SYS (move_pages)},
-    {SCMP_SYS (mbind)},
-    {SCMP_SYS (get_mempolicy)},
-    {SCMP_SYS (set_mempolicy)},
-    {SCMP_SYS (migrate_pages)},
+    {SCMP_SYS (move_pages), EPERM},
+    {SCMP_SYS (mbind), EPERM},
+    {SCMP_SYS (get_mempolicy), EPERM},
+    {SCMP_SYS (set_mempolicy), EPERM},
+    {SCMP_SYS (migrate_pages), EPERM},
 
     /* Don't allow subnamespace setups: */
-    {SCMP_SYS (unshare)},
-    {SCMP_SYS (mount)},
-    {SCMP_SYS (pivot_root)},
+    {SCMP_SYS (unshare), EPERM},
+    {SCMP_SYS (mount), EPERM},
+    {SCMP_SYS (pivot_root), EPERM},
 #if defined(__s390__) || defined(__s390x__) || defined(__CRIS__)
     /* Architectures with CONFIG_CLONE_BACKWARDS2: the child stack
      * and flags arguments are reversed so the flags come second */
-    {SCMP_SYS (clone), &SCMP_A1 (SCMP_CMP_MASKED_EQ, CLONE_NEWUSER, CLONE_NEWUSER)},
+    {SCMP_SYS (clone), EPERM, &SCMP_A1 (SCMP_CMP_MASKED_EQ, CLONE_NEWUSER, CLONE_NEWUSER)},
 #else
     /* Normally the flags come first */
-    {SCMP_SYS (clone), &SCMP_A0 (SCMP_CMP_MASKED_EQ, CLONE_NEWUSER, CLONE_NEWUSER)},
+    {SCMP_SYS (clone), EPERM, &SCMP_A0 (SCMP_CMP_MASKED_EQ, CLONE_NEWUSER, CLONE_NEWUSER)},
 #endif
 
     /* Don't allow faking input to the controlling tty (CVE-2017-5226) */
-    {SCMP_SYS (ioctl), &SCMP_A1 (SCMP_CMP_MASKED_EQ, 0xFFFFFFFFu, (int) TIOCSTI)},
+    {SCMP_SYS (ioctl), EPERM, &SCMP_A1 (SCMP_CMP_MASKED_EQ, 0xFFFFFFFFu, (int) TIOCSTI)},
   };
 
   struct
   {
     int                  scall;
+    int                  errnum;
     struct scmp_arg_cmp *arg;
   } syscall_nondevel_blocklist[] = {
     /* Profiling operations; we expect these to be done by tools from outside
      * the sandbox.  In particular perf has been the source of many CVEs.
      */
-    {SCMP_SYS (perf_event_open)},
+    {SCMP_SYS (perf_event_open), EPERM},
     /* Don't allow you to switch to bsd emulation or whatnot */
-    {SCMP_SYS (personality), &SCMP_A0 (SCMP_CMP_NE, allowed_personality)},
-    {SCMP_SYS (ptrace)}
+    {SCMP_SYS (personality), EPERM, &SCMP_A0 (SCMP_CMP_NE, allowed_personality)},
+    {SCMP_SYS (ptrace), EPERM}
   };
   /* Blocklist all but unix, inet, inet6 and netlink */
   struct
@@ -2922,10 +2924,14 @@ setup_seccomp (FlatpakBwrap   *bwrap,
   for (i = 0; i < G_N_ELEMENTS (syscall_blocklist); i++)
     {
       int scall = syscall_blocklist[i].scall;
+      int errnum = syscall_blocklist[i].errnum;
+
+      g_return_val_if_fail (errnum == EPERM || errnum == ENOSYS, FALSE);
+
       if (syscall_blocklist[i].arg)
-        r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (EPERM), scall, 1, *syscall_blocklist[i].arg);
+        r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (errnum), scall, 1, *syscall_blocklist[i].arg);
       else
-        r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (EPERM), scall, 0);
+        r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (errnum), scall, 0);
       if (r < 0 && r == -EFAULT /* unknown syscall */)
         return flatpak_fail_error (error, FLATPAK_ERROR_SETUP_FAILED, _("Failed to block syscall %d"), scall);
     }
@@ -2935,10 +2941,14 @@ setup_seccomp (FlatpakBwrap   *bwrap,
       for (i = 0; i < G_N_ELEMENTS (syscall_nondevel_blocklist); i++)
         {
           int scall = syscall_nondevel_blocklist[i].scall;
+          int errnum = syscall_nondevel_blocklist[i].errnum;
+
+          g_return_val_if_fail (errnum == EPERM || errnum == ENOSYS, FALSE);
+
           if (syscall_nondevel_blocklist[i].arg)
-            r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (EPERM), scall, 1, *syscall_nondevel_blocklist[i].arg);
+            r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (errnum), scall, 1, *syscall_nondevel_blocklist[i].arg);
           else
-            r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (EPERM), scall, 0);
+            r = seccomp_rule_add (seccomp, SCMP_ACT_ERRNO (errnum), scall, 0);
 
           if (r < 0 && r == -EFAULT /* unknown syscall */)
             return flatpak_fail_error (error, FLATPAK_ERROR_SETUP_FAILED, _("Failed to block syscall %d"), scall);
-- 
2.27.0